how to make a kaleidoscope step by step
Answers
Answered by
3
1. If you are planning on painting your cardboard tube, do that first. We used our favorite tempera paint. Set it aside to dry.
2. Next, you’ll need to cut your mylar sheets into three equal strips. You’ll want the size to be just right so the finished kaleidoscope insert fits snuggly in your cardboard tube and won’t fall out.
We used cardboard tubes from an empty Cottonelle toilet paper roll. I’m not sure if different brands of toilet paper use different sizes of cardboard tubes, but these are the exact sizes that worked with our Cottonelle tubes. You might need to adjust yours depending on the size of your tube. (Since you won’t want to waste any mylar, practice sizing yours using cardstock first.)
We cut our mylar into strips that measured 9.7cm x 3.5 cm.
3. Line up your mylar strips, leave a tiny space between each one. (Place the shiniest/least scratched sides face down.) Tape them together over the spaces.
4. Fold the taped mylar into a triangular prism and tape along the top to hold in place.
5. This should fit snuggly inside your cardboard tube.
6. Cut off the bendy end of a flexible straw.
7. Tape it along the top of your tube with the flexible part of the straw hanging over the edge.
8. Cut out 3 circles from cardstock. Ours measured 3.75 inches in diameter. (You can print out our free circle template or just make your own.)
9. Poke a hole in the center of your circle. (I used a sharp pencil.)
10. Decorate the circle using markers, stickers, crayons etc. Try out different designs, shapes, and letters!
11. Place the circle onto your straw with the design facing the kaleidoscope. You want the hole to fit over the flexible portion of the straw so it will turn easily.
12. Look into your kaleidoscope and explore all the reflections created by your design!
2. Next, you’ll need to cut your mylar sheets into three equal strips. You’ll want the size to be just right so the finished kaleidoscope insert fits snuggly in your cardboard tube and won’t fall out.
We used cardboard tubes from an empty Cottonelle toilet paper roll. I’m not sure if different brands of toilet paper use different sizes of cardboard tubes, but these are the exact sizes that worked with our Cottonelle tubes. You might need to adjust yours depending on the size of your tube. (Since you won’t want to waste any mylar, practice sizing yours using cardstock first.)
We cut our mylar into strips that measured 9.7cm x 3.5 cm.
3. Line up your mylar strips, leave a tiny space between each one. (Place the shiniest/least scratched sides face down.) Tape them together over the spaces.
4. Fold the taped mylar into a triangular prism and tape along the top to hold in place.
5. This should fit snuggly inside your cardboard tube.
6. Cut off the bendy end of a flexible straw.
7. Tape it along the top of your tube with the flexible part of the straw hanging over the edge.
8. Cut out 3 circles from cardstock. Ours measured 3.75 inches in diameter. (You can print out our free circle template or just make your own.)
9. Poke a hole in the center of your circle. (I used a sharp pencil.)
10. Decorate the circle using markers, stickers, crayons etc. Try out different designs, shapes, and letters!
11. Place the circle onto your straw with the design facing the kaleidoscope. You want the hole to fit over the flexible portion of the straw so it will turn easily.
12. Look into your kaleidoscope and explore all the reflections created by your design!
Answered by
2
easy method to make kaleidoscope is
>> take three plane mirrors
>> stick them in triangular shape
>> cover both sides with cardboard
>> break some glass bangles and keep inside it
>> keep a hole in one side
and observe
Hope it Helpz
Naz:):)
Similar questions