how to make helicopter
Answers
Answered by
3
hlo, yash I will tell you the simple procedures how to make a simple helicopter. using plastic bottles , it's very easy..here, I am telling you the procedures how to make a recycled bottle helicopter.
MATERIAL REQUIRED;-
1) Plastic bottle ( it can be good in looking if you prefer small bottle).
2) Plastic straws
3) Ping Pong ball
4) Pin
TOOLS REQUIRED:-
1) scissors
2) stapler
PROCEDURE:-
step 1:- Prepare all tools and supplies like stated above .
step2:- Use scissors or any tool with small, sharp end to make a hole in the plastic cap. Try to do it in the middle and be very careful as you’ll need all your fingers later.
step3:- Cut the bottle into two parts and also one stripe which will make the joint for skids.
It should have that ball-shaped part to put the ping pong ball inside.
step4:- Now you need to cut three straws . (three parts with bent heads should be a bit shorter than the rest of the straw).
step5:- Use a pin to put two longer parts together making a propeller. Pin previously cut stripe to shorter straws with a stapler to prepare skids, afterwards stick the last bent straw, into the hole in a cap. Now you’ve got the three most important parts to build your mini helicopter .
step 6:- with The part with a cap should be now attached to the body with a stapler .
step 7:- The final action in your crafting experience is to put the ping pong ball into the body, forming a cockpit.
you can try it's very easy to made..
and have fun....
CHEERS ☺
MATERIAL REQUIRED;-
1) Plastic bottle ( it can be good in looking if you prefer small bottle).
2) Plastic straws
3) Ping Pong ball
4) Pin
TOOLS REQUIRED:-
1) scissors
2) stapler
PROCEDURE:-
step 1:- Prepare all tools and supplies like stated above .
step2:- Use scissors or any tool with small, sharp end to make a hole in the plastic cap. Try to do it in the middle and be very careful as you’ll need all your fingers later.
step3:- Cut the bottle into two parts and also one stripe which will make the joint for skids.
It should have that ball-shaped part to put the ping pong ball inside.
step4:- Now you need to cut three straws . (three parts with bent heads should be a bit shorter than the rest of the straw).
step5:- Use a pin to put two longer parts together making a propeller. Pin previously cut stripe to shorter straws with a stapler to prepare skids, afterwards stick the last bent straw, into the hole in a cap. Now you’ve got the three most important parts to build your mini helicopter .
step 6:- with The part with a cap should be now attached to the body with a stapler .
step 7:- The final action in your crafting experience is to put the ping pong ball into the body, forming a cockpit.
you can try it's very easy to made..
and have fun....
CHEERS ☺
Attachments:
AkashMandal:
hopez it will help u
Similar questions