Question

how to make sandpaper

Answer 1

hey mate here is your answer....

Step 1

Cut coarse or stiff-backed paper into an 8-by-10 inch piece.

Step 2

Place the paper flat on wood or particle board that is larger and wider than the paper.

Step 3

Apply a liquid adhesive to the side that is facing up. Spread the adhesive with a putty knife to cover the entire piece of paper. It is okay if the adhesive gets onto the board.

Step 4

Using a wire framed sifter that you can easily hold with one hand, scoop up coarse granules of sand from a bag or bin. Spread the sand across the paper, filling as much of the paper surface as you can.

Step 5

Allow time for the glue to dry and for the sand to adhere to it. Then, place a similar sized board on top of the paper and clamp the two boards together. Allow the paper to set for a day or more.

Step 6

Remove the clamps and top board. Remove the paper from the bottom board by gently getting under it with the putty knife. Scrape away any glue that is connecting the paper to the board. Try not to cut through or rip the paper. Cut the paper to the desired size.


hope it helps you mark it brainliest if you like ^_^