how to make walking robot?
Answers
Answered by
2
STEP 1: COMPONENTS/PART NECESSARY:
1> An old PC's CD player's door opening mechanism.
2> Battery: 3.7V Li-Po battery (140mAh to 330mAh)
3> Two Green 3mm LEDs to make eyes.
4> One small switch.
5> Iron wires.
6> some pipes from old pen refill or sketch pens.
7> Wire, soldering iron, some tools like screw driven, cutter, pliers, glue etc.
STEP 2: STEP-BY-STEP VIDEO INSTRUCTION:
STEP 3: SOME NECESSARY INFORMATION:
(This I attached u in 1st,2nd and 3rd photos)
STEP 4: SCHEMATIC
(This I attached u in 4th photo)
Ans some information for step 4
The circuit was powered by a small 3.7V Li-Po Battery. Two green 3mm LEDs in series with 330Ohm resistors were used to make eyes.
1> An old PC's CD player's door opening mechanism.
2> Battery: 3.7V Li-Po battery (140mAh to 330mAh)
3> Two Green 3mm LEDs to make eyes.
4> One small switch.
5> Iron wires.
6> some pipes from old pen refill or sketch pens.
7> Wire, soldering iron, some tools like screw driven, cutter, pliers, glue etc.
STEP 2: STEP-BY-STEP VIDEO INSTRUCTION:
STEP 3: SOME NECESSARY INFORMATION:
(This I attached u in 1st,2nd and 3rd photos)
STEP 4: SCHEMATIC
(This I attached u in 4th photo)
Ans some information for step 4
The circuit was powered by a small 3.7V Li-Po Battery. Two green 3mm LEDs in series with 330Ohm resistors were used to make eyes.
Attachments:
Similar questions