How to separate carbon iodine and carbon?
Answers
Answered by
0
➡You should get good recovery of your iodine by heating in a solution of NaOH. According to the paper:
➡The optimal desorption conditions obtained by the software are as follows: temperature of NaOH solution: 50oC50oC, concentration of NaOH solution: 0.5 % and agitation speed: 300rpm. Desorption experiments under these optimal conditions showed 98.9% desorption. The Taguchi design software results also showed that in the desorption section, the contributions of each factor on desorption percentage are as follows: concentration of NaOH solution (55%), temperature of NaOH solution (39.4%) and agitation speed (4.6%).
[...]
the necessary time for equilibrium desorption is obtained as 6h.
The paper does not discuss the algorithms used to calculate the relative importance of the different parameters, but obviously temperature and NaOH concentration are the important factors to getting such good recovery.
Hope it helps you ♥
➡The optimal desorption conditions obtained by the software are as follows: temperature of NaOH solution: 50oC50oC, concentration of NaOH solution: 0.5 % and agitation speed: 300rpm. Desorption experiments under these optimal conditions showed 98.9% desorption. The Taguchi design software results also showed that in the desorption section, the contributions of each factor on desorption percentage are as follows: concentration of NaOH solution (55%), temperature of NaOH solution (39.4%) and agitation speed (4.6%).
[...]
the necessary time for equilibrium desorption is obtained as 6h.
The paper does not discuss the algorithms used to calculate the relative importance of the different parameters, but obviously temperature and NaOH concentration are the important factors to getting such good recovery.
Hope it helps you ♥
Answered by
4
★ HEY USER .! ★
HERE IS YOURS ANSWER;
◆ We can use Sublimation To separate Iodine & Carbon from each other.
◆ As the Iodine will get dissolved in atmosphere in uniform conditions and the carbon will be left of.
HOPE IT HELPS
HERE IS YOURS ANSWER;
◆ We can use Sublimation To separate Iodine & Carbon from each other.
◆ As the Iodine will get dissolved in atmosphere in uniform conditions and the carbon will be left of.
HOPE IT HELPS
Similar questions