Science, asked by Anonymous, 4 months ago

How water can be made safe of drinking?[write more than 5 points]

Answers

Answered by shamanthmp96
1

Make your Water Safe for Drinking with Simple Water Purification Techniques

When you go on an outdoor adventure in a place like Bryce Canyon, it is possible to experience a depletion of your water supply. Or probably due to some circumstances you were forced to stay outdoors longer than what you intended. Water in places like Bryce Canyon’s streams are not very safe to drink, so there is a need to purify it before you drink it.

Nowadays, it becomes easier to purify water. There are easy and simple ways how you can purify water that you will find along trails like the Navajo Loop and others to make it suitable for drinking purposes. You can purify water by treating it with a chemical; either chlorine or iodine. You can also use filtration or ultraviolet light. Another simple way is to boil the water. All of these methods are effective provided they are done properly. Anyway, you only need to choose one method that you are more comfortable with.

When you have consumed all your water supply and you have not yet reached your target destination, you could be dehydrated and would cause further delay in reaching your destination. Dehydration can be prevented. Sometimes, you could have even ignored or neglected the fact that you could get dehydrated. When you are dehydrated, you will experience dizziness, dry lips, headaches and at times, you become nauseous. Dehydration can lead to more severe conditions like heat stroke or heat exhaustion. This is something that you should not ignore because it could be life threatening.

You need to be observant of your trail so you know where to find watering holes just in case you run out of water supply. Water in these areas are not safe for human consumption. Thus, there is a need to purify the water to make it suitable for drinking. The following are the common methods of water purification.

Boiling

This is a reliable way to purify water. However, boiling uses fuel and could take a while. Moreover, on summer days, it is not actually appealing to drink hot water. Furthermore, you will need to filter the water to remove all solid particles especially if the water was taken from a doubtful; water source.

Use of Iodine solution, tablets or crystals

This is an effective and more convenient method. It is also available in different forms you will surely find one that would suit your budget. It has the ability to kill viruses and bacteria. They are lightweight and easy to use. However, it takes about thirty minutes before you can drink the treated water. It is also not suitable for pregnant women. In addition, it has an aftertaste that you might not like. Once you drop the tablet into the water container, shake the container and hold the bottle upside down and have the lid slightly unscrewed to let the iodine to flow into the threads of the bottle cap.

Use chlorine drops

Chlorine has the ability to kill bacteria in water. It is also lightweight, affordable, and easily accessible. You need to wait for thirty minutes before you can drink the treated water. You need to make sure not to put so many drops as it could also be poisonous if used too much.

Use water filter

Water filters can remove bacteria in water. Carbon on the other hand gets rid of the chemicals and awful tastes while iodine coated screens can further remove viruses. Treated water can be consumed after the treatment and the water has no bad taste. However, they are heavier than iodine or chlorine, more costly and needs manual pumping. Also, you will need to clean the filters after the activity and at some point; you will need to replace them after treating several gallons of water.

Use Ultraviolet Light

This looks similar to a small flashlight. You just swish it around in the water for a few minutes and the bacteria can already be killed. This is very easy to carry with you and so easy to use. However, you will need batteries to operate it and batteries could run out. Moreover, the solid particles in the water are not filtered.

All of these are great tips and will make a stay in Bryce Canyon that much better, because you’ll know how to take care of yourself if you get in a bind. These tips can be useful while camping, hiking, and mountain climbing Bryce

Answered by BrainlyUnnati
13

Question:-

How water can be made safe for drinking?

Answer:-

  • A physical method of removing impurities.

  • A popular household filter is a candle type filter.

  • Many households use boiling as a method for obtaining safe drinking water.

  • Boiling kills the germs present in the water.

  • Chlorination is a commonly used chemical method for purifying water.

  • It is done by adding chlorine tablets or bleaching powder to the water.

  • We must be cautious.

  • We should not use more chlorine tablets than specified.

Extra information:-

What are the eight methods to purify water?

Here are some of the most effective water purification methods that have stood the test of time:

  • Boiling. The simplest method to purify water is to boil it for a good amount of time.

  • Water Purifier.

  • Reverse Osmosis.

  • Water Chlorination.

  • Distillation.

  • Iodine Addition.

  • Solar Purification.

  • Clay Vessel Filtration.

____________________________________

Similar questions