how we can make a VR box
Answers
Answered by
0
you can see this in google also .Steps are=
1.Carefully cut out the design files with a pair of scissor.
2.Glue the two light number pieces on top of the dark number.
3 . carefully cut out the design file with yourX auto knife or boc cutter.
4.The furthest flap to the right should be folded over the pieces to the left and glued down.tjis is where the magnet will eventually go. Next, fold inward along the red lines on the design templates.
5.Glue the third eyepiece together and slide your lenses into the slot.
6.connect the ceramic disk to the circle on the far right magnet behind it.
7. place the eyepiece on the cardboard in the slots near the opening for your nose. fold the cardboard from the right and attach each slots to the glooves im the eyepieces. fold the last flap from the left and glue it to yhe headset .Next don't forgot to connect the smaller driver
in to the front of eyepieces.
8.attach the valcto on the left and right side of the top flatp, with the other piece attached the folded cardboard acroo from it . if you are worried your smartphone may fall out from cardboard , Google recommend used a band to keep it in place.
1.Carefully cut out the design files with a pair of scissor.
2.Glue the two light number pieces on top of the dark number.
3 . carefully cut out the design file with yourX auto knife or boc cutter.
4.The furthest flap to the right should be folded over the pieces to the left and glued down.tjis is where the magnet will eventually go. Next, fold inward along the red lines on the design templates.
5.Glue the third eyepiece together and slide your lenses into the slot.
6.connect the ceramic disk to the circle on the far right magnet behind it.
7. place the eyepiece on the cardboard in the slots near the opening for your nose. fold the cardboard from the right and attach each slots to the glooves im the eyepieces. fold the last flap from the left and glue it to yhe headset .Next don't forgot to connect the smaller driver
in to the front of eyepieces.
8.attach the valcto on the left and right side of the top flatp, with the other piece attached the folded cardboard acroo from it . if you are worried your smartphone may fall out from cardboard , Google recommend used a band to keep it in place.
Similar questions