Physics, asked by AnshuArnabBrainlist, 7 months ago

If you want to make an anemometer, what materials will you require? How will you assemble
it? (Write the stepwise procedure)
>Plz Answer Fast!​

Answers

Answered by purplereads
2

Answer:

An anemometer is a device that is used to measure wind speed. There are many different types of anemometers suited for different environments, situations, and measurements. A cup anemometer is a basic type of measuring device, while newer, more accurate anemometers can make use of lasers and ultrasonic measuring technology.

An anemometer is a device that is used to measure wind speed. There are many different types of anemometers suited for different environments, situations, and measurements. A cup anemometer is a basic type of measuring device, while newer, more accurate anemometers can make use of lasers and ultrasonic measuring technology.A cup anemometer is commonly called a Robinson anemometer. It uses cup-like shapes to catch the wind, causing the device to spin. How many times it spins in a given time interval can tell you how fast the wind is moving. In this experiment, we'll learn how to make an anemometer and calibrate it.

Materials:

  • 5 small paper cups.
  • Hole punch.
  • Scissors.
  • Duct tape.
  • 3 thin wooden dowels.
  • Empty water bottle.
  • Stopwatch.

Procedure:

  1. Use the hole punch to make a hole in the side of each of the 4 paper cups.
  2. Use the hole punch to make 4 holes spaced evenly around the rim of the last cup. This will be the center of the anemometer.
  3. Slide 2 of the wooden dowels through the holes in the center cup. They should cross in an “X.”
  4. Insert the ends of the dowels into the holes of the other cups and tape them into place. Make sure the cups are all facing the same direction.
  5. Take the last wooden dowel and make a hole in the bottom of the center cup.
  6. Push the dowel up until it meets the X and tape everything together. This will be your rotation axis.
  7. Put the center dowel into an empty water bottle and begin testing!

To calibrate your anemometer:

  • On a windless day, have an adult drive you down the street at 10 miles per hour.
  • Hold the anemometer out the window and count the number of rotations in 30 seconds.
  • However many times your anemometer spins in 30 seconds will correspond roughly to wind blowing at 10 miles per hour.

(answer over)

please mark me as brainliest and follow me bye mate and please mark me as brainliest as soon as you can so I can become a expert

Similar questions