Question

if you want to make anemometer what materials will you require how will you assemble it write the step wise procedure​

Answer 1

Answer:

your answer is here buddy...

An anemometer is a device that is used to measure wind speed. There are many different types of anemometers suited for different environments, situations, and measurements. A cup anemometer is a basic type of measuring device, while newer, more accurate anemometers can make use of lasers and ultrasonic measuring technology.

A cup anemometer is commonly called a Robinson anemometer. It uses cup-like shapes to catch the wind, causing the device to spin. How many times it spins in a given time interval can tell you how fast the wind is moving. In this experiment, we'll learn how to make an anemometer and calibrate it.

Materials:

5 small paper cups

Hole punch

Scissors

Duct tape

3 thin wooden dowels

Empty water bottle

Stopwatch

Procedure:

Use the hole punch to make a hole in the side of each of the 4 paper cups.

Use the hole punch to make 4 holes spaced evenly around the rim of the last cup. This will be the center of the anemometer.

Slide 2 of the wooden dowels through the holes in the center cup. They should cross in an “X.”

Insert the ends of the dowels into the holes of the other cups and tape them into place. Make sure the cups are all facing the same direction.

Take the last wooden dowel and make a hole in the bottom of the center cup.

Push the dowel up until it meets the X and tape everything together. This will be your rotation axis.

Put the center dowel into an empty water bottle and begin testing!

HOPE THIS WILL HELP U...

FOLLOW ME IF U NEED...

PLSS MARK AS BRAINLIST IF YOU LIKE MY ANSWER..

AND PRESS ♥️♥️♥️♥️ IF MY ANSWER TOUCHES YOUR HEART ♥️♥️♥️