Question

in case of two assets/module operate in active and standby mode is called as

Answer 1

Answer:

disaster

Explanation:

its distaster and must be it

Answer 2

You can configure two data centers topology in either active-standby mode or active-active mode.

• In active-standby mode, one zone actively serves clients on both virtual IP addresses while the other zone does not. That is, by enabling active-standby mode, you are consciously arranging for all clients to transfer to a single zone. When conducting administrative duties on one of the host machines, you can use active-standby mode.
• Even though zone 1 is still operational and reachable, active-standby mode (this figure) is analogous to a zone failover situation.
• Rendezvous daemons run in Zone 2 and service clients on virtual IP addresses A and B, respectively. Meanwhile, no consumers are served by the Rendezvous services in Zone 1.
• The clients are still divided into two distinct groupings based on the IP address at which each connects to a Rendezvous daemon. This differentiation, however, does not bind the clients to discrete zones.