IPO cycle was first time used in which machine
Answers
Answer:
The first time to follow IPO cycle is the moving car on the road.
Answer:
IPO cycle of computer
Any electronic machine that performs 'IPO cycle' is known as computer.
IPO Cycle figure is given below :-
I P O
Input
(raw data)
input devices
> Mouse
> Keyboard
> Scanner
> Webcam
> Digital camera
> Microphone
> Joysticks, etc.
Process
(Invisible)
processing device
>CPU
(Central Processing Unit) > Printer
Output
(result)
output devices
> Monitor
> Speaker
> Printer
Input :- Input is the raw data entered into a computer from the input devices. It is the collection of numbers, letters, images, etc. Keyboard, Mouse, scanner, webcam, etc are some examples of the input devices.
Process :- Process is the operation of data or information as per given instruction. It is totally internal process of the computer system. CPU (Central processing Unit) is the main processing device of the computer.
Output :- Output is the result of processed data given by computer after data processing. we can save these results in the storage devices for the future use. Monitor, Printer, Speaker are the main output devices.
IPO Cycle in Detail
Input Devices
Devices which transfer data, programs, or signals into a computer systems are called input devices. These devices are used to give raw data to the computer to perform the specific tasks. Firstly, the data, programs, a signals are fed into the input devices in a suitable form, and are then converted by the device into electrical signals from human-readable format that are transmitted to the central processing unit of the computer.
The Processing Device
The Processor
(CPU – Central Processing Unit)
The main unit inside the computer is the CPU. This unit is responsible for all events inside the computer. It controls all internal and external devices, performs arithmetic and logic operations. The CPU (Central Processing Unit) is the device that interprets and executes instructions.
The operations, a microprocessor performs are called the instruction set of this processor. Processors differ from one to another by the instruction set. If the same program can run on two different computer brands they are set to be compatible. Programs written for IBM compatible computers will not run on apple computers because these two architectures are not compatible.
Mainframes and early mini computers contained circuit boards full of integrated circuits cards implemented the central processing unit. Today’s single chip central processing units, called microprocessors, make personal computers and workstations possible. The CPU has the ability to fetch, decode, and execute instructions and transfer information to and from other recourses over the computer’s main data-transfer path, the bus. By definition, the CPU is the chip that functions as the brain of a computer. In some instances, however, the term encompasses both the processor and the computer’s memory or, even more broadly, the main computer console.
All processors use transistors as switched to produce signals, much like a light switch, which digitizes the information and breaks them up into small chumps. If you have one transistor you can perform two signals-on and off. If you have two transistors you can perform signals-both on, both off, first on, second off, first off, second on. This is interpreted in binary, such as: 00111001 – 0 for off, 1 for on.
The CPU is composed of several units:
The Control Unit (CU) directs add controls the activities of the internal and external devices. It interprets the instructions obtained into the computer, determines what data are needed, where it is stored, where to stored the results of the operations, and sends the control signal to the devices involved in the execution of the instructions.
The Arithmetic and Logic Unit (ALU) is the part where actual computations take place. It consists of circuits, which perform arithmetic operations (e.g. Addition, subtraction, multiplication, division) over data receive from memory and capable to compare numbers.