It is a Engineering graphics question
A cylinder of base diameter 50mm and height 70mm is resting on hp on one of its base.it is cut by a sectional plane inclined at 60degree to hp and located 25mm
from the top base draw the front view and sectional top view and true shape of section
Answers
right circular cone of base diameter 60mm is cut by a section plane so that the true shape of the section is a parabola of maximum double ordinate 50mm and vertex of the parabola is 70mm from this ordinate.right circular cone of 40mm diameter and 50mm height is standing on its base on HP. The vertical trace of a section plane perpendicular to VP makes an angle of 450 with the reference line and intersects the axis of cone at a distance of 20mm from the vertex. Draw the true shape of the section and the development of lower part of sectioned cone.
3. A right circular cone of base diameter 60mm is cut by a section plane so that the true shape of the section is a parabola of maximum double ordinate 50mm and vertex of the parabola is 70mm from this ordinate. Draw the front view, sectional top view and true shape of the section.
4. A cylinder of diameter 50mm and length of the axis 65mm rests on its base with the axis perpendicular to the HP.it is cut by the cutting plane perpendicular to the VP, inclined at 450 to the HP and passing through a point on axis 25mm from the top. Draw the front view, the sectional top view and the development of the lateral surface of the cylinder.