Jones tendon transfer radial nerve palsy which tendon is taken
Answers
A tendency transfer process transfers the movement of lost work on another site and the inclusion of a working muscle-tendon unit (MTU) to restore the work.
Principles of Shoulder Transfer Procedures
The principles of successful tendency transfer processes have been identified in the last century and have been refined. They are 1) supplementation addition before transfer, 2) soft tissue balance, 3) donor of adequate excursion, 4) donor of sufficient strength, 5) giver, 6) straight line of drag, 7) synergy, and 8) Single copy transfer function.
Supplement joints before transfer
The joint which will transfer the transfer, must be the maximum passive limit of speed before that process. If the joint has become rigid then one shoulder shift process will fail. Often, aggressive therapy is needed to obtain and maintain a complementary joint before doing the tendon transfer process. If contract release is required, then it should be done before the tendon transfer process, and it should be followed after intensive care to maintain the speed limit. Because immobilization is required after a tendency transfer process to allow the treatment of tendon junction, contract release should not be done at the same time.
Soft tissue balance
The principle of soft tissue balance refers to the idea that a tendon should pass through a healthy bed of transfer tissue that is free from swelling, edema and scars. It is necessary that tendon freely glide and allow adhesion to be reduced. After soft tissue injury, the surgeon should allow enough time to completely reduce swelling and adima. If the schematic tendon transfer should pass through the area of scarcely scattered tissue, then the mark should be grown and replaced with a flap, or an alternative transfer should be considered through a healthy bed.
Answer:
The major controversy in the tendon transfer for radial nerve has been between the use of FCU or flexor carpi radialis (FCR) for providing digital extension and use of single or multiple transfers to provide extension and abduction of thumb.