Question

justify suitability of cement from
fineness of OPC sample a is 15% and 8% ​

Answer 1

Answer:

Significance and Why to test fineness test of Cement?:-

Significance and Why to test fineness test of Cement?:-We know that cement hydrates with the presence of water. When cement is mixed with the water, a thin layer is formed around the particle. This layer grows bigger and makes cement particles to separate. Due to this, hydration process slows down. Therefore, the smaller particle will react much quicker than the larger particle. A particle with dia 1µm will react entirely in one day, whereas the particle with dia 10µm takes about one month. So the particle size distribution is more critical in attaining the final strength of cement in allowable time.

Significance and Why to test fineness test of Cement?:-We know that cement hydrates with the presence of water. When cement is mixed with the water, a thin layer is formed around the particle. This layer grows bigger and makes cement particles to separate. Due to this, hydration process slows down. Therefore, the smaller particle will react much quicker than the larger particle. A particle with dia 1µm will react entirely in one day, whereas the particle with dia 10µm takes about one month. So the particle size distribution is more critical in attaining the final strength of cement in allowable time.But too much of smaller particles in cement results in quick setting, leaving no time for mixing, handling and placing. So to increase the setting time of cement, cement is ground in a different range of particle sizes.

Significance and Why to test fineness test of Cement?:-We know that cement hydrates with the presence of water. When cement is mixed with the water, a thin layer is formed around the particle. This layer grows bigger and makes cement particles to separate. Due to this, hydration process slows down. Therefore, the smaller particle will react much quicker than the larger particle. A particle with dia 1µm will react entirely in one day, whereas the particle with dia 10µm takes about one month. So the particle size distribution is more critical in attaining the final strength of cement in allowable time.But too much of smaller particles in cement results in quick setting, leaving no time for mixing, handling and placing. So to increase the setting time of cement, cement is ground in a different range of particle sizes.The following proportions are usually maintained in Cement: About 10% of the cement of fine particles is smaller than 2 µm, 10% of wt of cement is made of particles larger than 50 µm, and only a few wt% is particles larger than 90 µm...

Explanation:

HOPE THIS WILL HELPS U MATE ✌️

.....

HAVE A NICE DAY BUDDY...

MARK ME BRAINLIEST ❤️ AND FOLLOW ME..

BHUMI HERE.....

Answer 2

Answer:

fineness of opc sample a is 15%