magnets are used in maglev trains.explane.
Answers
Answer:
Permanent magnets are always magnetic. Electromagnets are magnetic only when an electric current flows through them. The north and south poles of an electromagnet are related to the direction of the current. If the direction of the current is reversed, the poles are reversed.
In maglevs that levitate by magnetic repulsion, the train lies over the guideway. Magnets on top of the guideway are oriented to repel similar poles of magnets in the bottom of the maglev. This pushes the train upward into a hovering position. This system is designed for maglevs that contain groups of extremely powerful superconducting electromagnets. These magnets use less electricity than conventional electromagnets, but they must be cooled to very low temperatures—from −269 degrees Celsius to −196 degrees Celsius.
In maglevs that levitate by magnetic attraction, the bottom of the train wraps around the guideway. Levitation magnets on the underside of the guideway are positioned to attract the opposite poles of magnets on the wraparound section of the maglev. This raises the train off the track. The magnets in the guideway attract the wraparound section only strongly enough to raise the train a few centimeters into a “floating” position. The wraparound section does not touch the guideway. (Imagine a C-shaped bracelet floating around your wrist without touching it.)
To picture how a maglev train is propelled forward, think of three bar magnets lined up on the floor. The magnet in front is pulling with an attracting (opposite) magnetic pole and the magnet in back is pushing with a repulsing (similar) magnetic pole. The magnet in the middle moves forward. A maglev's guideway has a long line of electromagnets. These pull the train from the front and push it from behind. The electromagnets are powered by controlled alternating currents, so they can quickly change their pull and push poles, and thus continually propel the train forward.
magnets are used in maglev train as the have to move very fast so from that speed the tracks cannot come out .