Mount the control element and using accessories on the control pannel
Answers
❣️I hope it will help you ❣️
Industrial control panels consist of power circuits or control circuits (or both) which provide signals that direct the performance of machinery or equipment. Industrial control panels don’t include the main power, nor do they include the controlled equipment; rather, the panel is mounted on a back panel (or subpanel) or in an enclosure, depending on the application. Industrial control panel design begins with weighing design requirements and specifications and preparing schematics, but the design process can be quite complex in order to ensure that all applicable regulatory standards and safety requirements are met.
We’ve created this guide to provide an overview of the key design considerations applicable to industrial control panel design, including schematics, relevant regulatory standards, and design considerations relating to every facet of effective control panel design for industrial equipment and machinery.
Industrial Control Panel Design – Schematics
Control panel design for industrial equipment and machinery is an important undertaking, resulting in an interface designed to control a machine or process. It’s not a simple matter of selecting an appropriate enclosure and a back panel that houses the electrical hardware. So, the proper hardware must be mounted on a back panel and properly wired and integrated into the machine – any improper configuration can result in malfunctioning machinery, but it’s also likely to pose an unnecessary risk to operators.
The process should always begin with an evaluation of the specifications, requirements, and regulatory standards. After these considerations are evaluated, drawings are created to outline the specific configuration of wiring, circuits, controls, and every other aspect of the final control panel. Good design addresses both the electrical and physical requirements. These drawings should include: