name the three methods by which Hydra substances can be made anhydrous
Answers
Answer:
Many salts and solids can be dried using heat, or under vacuum. Desiccators can also be used to store reagents in dry conditions.
Common desiccants include phosphorus pentoxide and silica gel.
Chemists may also require dry glassware for sensitive reactions. This can be achieved by drying glassware in an oven, by flame, or under vacuum.
Dry solids can be produced by freeze-drying, which is also known as. lyophilization.
Liquids or solvents
In many cases, the presence of water can prevent a reaction from happening, or cause undesirable products to form. To prevent this, anhydrous solvents must be used when performing certain reactions. Examples of reactions requiring the use of anhydrous solvents are the Grignard reaction and the Wurtz reaction.
Solvents have typically been dried using distillation or by reaction with reactive metals or metal hydrides. These methods can be dangerous and are a common cause of lab fires. More modern techniques include the use of molecular sieves or a column purification system. Molecular sieves are far more effective than most common methods for drying solvents and are safer and require no special equipment for handling[1]. Column solvent purification devices (generally referred to as Grubb's columns) recently became available, reducing the hazards (water reactive substances, heat) from the classical dehydrating methods.[2][3]
Anhydrous solvents are commercially available from chemical suppliers, and are packaged in sealed containers to maintain dryness[4]. Typically anhydrous solvents will contain approximately 10 ppm of water and will increase in wetness if they are not properly stored.
Organic solutions can be dried using a range of drying agents. Typically following a workup the organic extract is dried using magnesium sulfate or a similar drying agent to remove most remaining water.[5]
Gases
Several substances that exist as gases at standard conditions of temperature and pressure are commonly used as concentrated aqueous solutions. To clarify that it is the gaseous form that is being referred to, the term anhydrous is prefixed to the name of the substance:
Gaseous ammonia is generally referred to as anhydrous ammonia to distinguish it from household ammonia, which is an ammonium hydroxide aqueous solution.
Gaseous hydrogen chloride is generally referred to as anhydrous to distinguish it from the more commonly used 37% w/w solution in water.
Explanation:
hey here is ur answer
by heating it
by evaporating the water
thank you