Note: - Attempt all questions. 1. Test the given diode using multi meter and determine forward to reverse resistance ratio. (5 1K 100x FORWARD BLAS REVERSE BIAS к к + KA LOW RESISTANCE HIGH RESISTANCE DIODE TESTING USING ANALOG MULTHETER SI No Forward Resistance (FR) Ratio of FR/RR Reverse Resistance (RR).
Answers
Answer:
Diodes conduct current in one direction but not the other. We solve a diode circuit graphically by plotting a diode
Answer: Diodes conduct current in one direction but not the other
Explanation:
How to Use a Multimeter to Test a Diode
A diode may be checked out of the circuit quickly and easily with a multimeter. With reverse bias, a good diode will exhibit an exceedingly high resistance (preferably an open resistance), and with forward bias, a very low resistance. An extremely high resistance (or open) will be visible for both forward and reverse bias on a damaged open diode. For both forward and reverse bias, a defective shorted or resistive diode will display zero or low resistance. An open diode is the most typical type of failure.
Position in DMM for Diode Testing
Many digital multimeters provide a diode test option that offers a simple method for checking a diode (DMMs). On a conventional DMM, a tiny diode indicator marks the location of the function switch. The meter offers an internal voltage adequate to forward-bias and reverse-bias a diode when it is set to diode test. Although the normal range is 2.5 V to 3.5 V, the internal voltages of different DMM brands may vary. A voltage reading or other indicator of the diode's state is provided by the meter.
A Diode Is Active when
Activating a Diode To forward bias the diode, the meter's red (positive) and black (negative) leads are connected to the anode and cathode, respectively. A reading of roughly 0.5 to 0.9 V, with 0.7 V being usual for forward bias, will be obtained if the diode is in good condition.
Reverse bias is achieved by rotating the diode as indicated. The reading is typical "OL" if the diode is operating properly. The internal voltage for a reverse-bias state may be shown on some DMMs.
The diode is Defect when
Both forward-bias and reverse-bias situations result in an "OL" indicator when a diode fails open.
The meter displays 0 V in both the forward-bias and reverse-bias tests when a diode is shorted.
Testing a Diode with the OHMs
By setting the function switch to an OHMs range, DMMs without a diode test position can be utilized to test diodes. You can measure resistance to assess a good diode's forward bias, but the result may differ based on the internal battery of the meter. Since many meters lack the voltage required to fully forward-bias a diode on the OHMs setting, you can see a reading of several hundred to several thousand ohms. Because the reverse resistance is too high for the meter to measure, you frequently see an out-of-range indicator, such as "OL," when doing a reverse-bias test on a healthy diode.
#SPJ3
https://brainly.in/question/53790939