Physics, asked by subhraghosh, 1 year ago

plz help me in this circuit problem. find the resistance between the two points A and B. all the resistances are 10 ohm. please give the explanation.

Attachments:

Answers

Answered by Mahin07
2
Potential Difference

The voltage difference between any two points in a circuit is known as the Potential Difference, pd or Voltage Drop and it is the difference between these two points that makes the current flow.

  

Unlike current which flows around a closed electrical circuit in the form of electrical charge, potential difference does not move or flow it is applied.

The unit of potential difference generated between two points is called the Volt and is generally defined as being the potential difference dropped across a fixed resistance of one ohm with a current of one ampere flowing through it. In other words, one volt = one amp x one ohm, or V = IxR.

Ohm’s Law states that for a linear circuit the current flowing through it is proportional to the potential difference across it so the greater the potential difference across any two points the bigger will be the current flowing through it.

For example, if the voltage at one side of a 10Ω resistor measures 8V and at the other side of the resistor it measures 5V, then the potential difference across the resistor would be 3V ( 8 – 5 ) causing a current of 0.3A to flow.


subhraghosh: thanks a lot
Mahin07: its my pleasure
subhraghosh: but i can't understand how i assume which resistances are in parallel or series in this circular circuit
subhraghosh: its too complicated
subhraghosh: can u please help me to clear this doubt?
Answered by Rajdeep11111
2
Resistors between A and B are connected in parallel because note that there are three (more than one) ways to reach B from A.

In each path, there is a 10ohm resistor.
Hence,
1/equivalent resistance = 1/10 + 1/10 + 1/10
= 3/10

or Equivalent resistance = 10/3 ohm

Thanks!!
Similar questions