Question

Procedure
1. Take an empty plastic bottic
2. Drill four holes at the same height from the bottom of the bottle.
3. Drill 2 holes at different heights from the previous one.
4. Cover the holes with tape.
5. Fill the water in boitie.
6. Remove the tape from the holes which are at different height
7. Now, remove the tape from the holes which are at the same height
both
Let's think
question= Do the stream of the water coming out from the holes at different height
fall at the same distance from the bottle?

​

Answer 1

Answer:

The water coming out of a hole in the side of a can near the bottom comes out quickly because the water pressure near the hole is bigger than the air pressure outside of the hole, and so there is a net force on a little bit of water that's passing through the hole.

Explanation:

Answer. Observation : When we will remove those two coverings from the bottle,the water will start coming out from those two holes. And,the rate of water flow from those two holes will be equal. ... Here,the two holes are situated in same height, that's why the water flow rates are equal for two holes.

Answer 2

Answer:

Material required: A plastic bottle and water.

Procedure:

1) Take a plastic bottle.

2) Drill four holes all around the bottle at same height from the bottom.

3) Pour water into the bottle.

Observation: Water flows out at equal pressure from the four holes.

Conclusion: Liquid exerts same pressure at the same depth.