Biology, asked by pagalpantii, 8 months ago

Q1: What is done in the process of spinning? Name any device used for spinning...?

Answers

Answered by singlesitaarat31
15

 \huge \red {\underline {HAYE\:MATE}}

 \huge \red {\mathbb {ANSWER}}

  • The process of making yarn from fibres is called spinning.

  • In this process, fibres from a mass of cotton wool are drawn out and twisted.

  • This brings the fibres together to form a yarn.

  • A device used for spinning is charkha.

 \huge \blue {\mathbb {THANKS}}

 \huge \green {FOllOW\:ME}

 \huge \purple {\mathbb {SINGLE\:STAR}}

Attachments:
Answered by bonifacealeruchi
2

Explanation:

The processes to make short-staple yarn (typically spun from fibers from 0.75 to 2.0") are blending, opening, carding, pin-drafting, roving, spinning, and—if desired—plying and dyeing. In long staple spinning, the process may start with stretch-break of tow, a continuous "rope" of synthetic fiber. In open-end and air-jet spinning, the roving operation is eliminated. The spinning frame winds yarn around a bobbin.[4] Generally, after this step the yarn is wound to a cone for knitting or weaving.In a spinning mule, the roving is pulled off bobbins and sequentially fed through rollers operating at several different speeds, thinning the roving at a consistent rate. The yarn is twisted through the spinning of the bobbin as the carriage moves out, and is rolled onto a cop as the carriage returns. Mule spinning produces a finer thread than ring spinning.[5] Spinning by the mule machine is an intermittent process as the frame advances and returns. It is the descendant of a device invented in 1779 by Samuel Crompton, and produces a softer, less twisted thread that is favored[by whom?] for fines and for weft.The ring was a descendant of the Arkwright water frame of 1769 and creates yarn in a continuous process. The yarn is coarser, has a greater twist, and is stronger, making it more suitable for warp. Ring spinning is slow due to the distance the thread must pass around the ring. Similar methods have improved on this including flyer and bobbin and cap spinning.The pre-industrial techniques of hand spinning with spindle or spinning wheel continue to be practiced as a handicraft or hobby, and enable wool or unusual vegetable and animal staples to be used.

Devices used for spinning:

Takli and Charkha are the two devices used for spinning

Similar questions