Computer Science, asked by sanashahidpurple, 22 days ago

Qy Write the function of the following network devices. Amplifiers, Routers, Switch, Hob?​

Answers

Answered by bmdeep
2

Answer:  Amplifiers:- An amplifier (often loosely called an "amp") is an electromagnetic or electronic component that boosts an electric current.

Routers:- you can refer the image of 1 st one

Switch:- A switch is a multiport bridge with a buffer and a design that can boost its efficiency(a large number of ports imply less traffic) and performance. A switch is a data link layer device. The switch can perform error checking before forwarding data, which makes it very efficient as it does not forward packets that have errors and forward good packets selectively to the correct port only.  In other words, the switch divides the collision domain of hosts, but broadcast domain remains the same.

Hob:- A hub is basically a multiport repeater. A hub connects multiple wires coming from different branches, for example, the connector in star topology which connects different stations. Hubs cannot filter data, so data packets are sent to all connected devices.  In other words, the collision domain of all hosts connected through Hub remains one.  Also, they do not have the intelligence to find out the best path for data packets which leads to inefficiencies and wastage.

Types of Hub  

Active Hub:- These are the hubs that have their own power supply and can clean, boost, and relay the signal along with the network. It serves both as a repeater as well as a wiring center. These are used to extend the maximum distance between nodes.

Passive Hub :- These are the hubs that collect wiring from nodes and power supply from the active hub. These hubs relay signals onto the network without cleaning and boosting them and can’t be used to extend the distance between nodes.

Intelligent Hub :- It works like active hubs and includes remote management capabilities. They also provide flexible data rates to network devices. It also enables an administrator to monitor the traffic passing through the hub and to configure each port in the hub.

pls mark me as a brainlist. and give 5.0 as rating

Attachments:
Similar questions