Ranjit had made a circuit with the help of a cell holder,a switch and a bulb.but the bulb did not glow when he switched on the circuit.help Ranjit to find out the possible mistake in the circuit.
Answers
Answered by
2
Explanation:
the bulb may be fused
the wires may be loose
the battery may be used up
and etc..
hope it helps u
Answered by
1
Answer:
One of the reasons may be that the rubber band used in the cell holder may not be tight enough to keep the two cells in contact with each other. If the cells are not in proper contact with each other, then the circuit will not be complete and current will not flow through the circuit. Hence, the bulb will not glow.
The other reason may be that the two cells are not connected properly. The negative terminal of one cell must be connected to the positive terminal of the other cell.
Similar questions