Reading of the practical, to determine the resistance of a galvanometer by half deflection method to find its figure of merit.
Answers
Answer:
2.1 Requirements for completing the phytosanitary certificate
(Headings in bold refer to the components of the model certificate)
The specific components of the phytosanitary certificate are explained as follows:
No. __________
This is the certificate identification number. It should be a unique serial number associated with an identification system that allows "trace-back", facilitates audits and serves for record keeping.
Plant Protection Organization of ____________
This component requires the name of the official organization and the name of the country that is issuing the certificate. The name of the NPPO may be added here if it is not part of the printed form.
TO: Plant Protection Organization(s) of ____________
The name of the importing country should be inserted here. In cases where the shipment transits through a country which has specific transit requirements, including the need for phytosanitary certificates, the names of both importing country and country of transit may be inserted. Care should be taken to ensure that the import and/or transit regulations of each country are met and appropriately indicated. In cases where the shipment is imported and re-exported to another country, the names of both importing countries may be inserted, provided the import regulations of both countries have been met.
Section I. Description of Consignment
Name and address of exporter: ____________
This information identifies the source of the consignment to facilitate "trace back" and audit by the exporting NPPO. The name and address should be located in the exporting country. The name and address of a local exporter’s agent or shipper should be used, where an international company with a foreign address is the exporter.
Declared name and address of consignee: ____________
The name and address should be inserted here and should be in sufficient detail to enable the importing NPPO to confirm the identity of the consignee. The importing country may require that the address be a location in the importing country.
Number and description of packages: ____________
Sufficient detail should be included in this section to enable the NPPO of the importing country to identify the consignment and its component parts, and verify their size if necessary. Container numbers and/or railcar numbers are a valid addition to the description of the packages and may be included here, if known.
Distinguishing marks: ____________
Distinguishing marks may be indicated at this point on the phytosanitary certificate, or else on a stamped and signed attachment to the certificate. Distinguishing marks on bags, cartons or other containers should be included only where they assist in identifying the consignment. Where no entry is made, the term “None” should be entered or the line should be blocked out (to prevent falsification).
Place of origin: ____________
This refers to place(s) from which a consignment gains its phytosanitary status, i.e. where it was possibly exposed to possible infestation or contamination by pests. Normally, this will be the place where the commodity was grown. If a commodity is stored or moved, its phytosanitary status may change over a period of time as a result of its new location. In such cases the new location may be considered as the place of origin. In specific circumstances, a commodity may gain its phytosanitary status from more than one place. In these cases where pests from one or more place may be involved, NPPOs should decide which place or places of origin most accurately describe the situation which has given the commodity its phytosanitary status. In such cases, each place should be declared. It is noted that in exceptional cases, such as with mixed seed lots that have more than one country of origin it is necessary to indicate all possible origins.
Countries may require that “pest free area,” “pest free place of production,” or “pest free production site” be identified in sufficient detail in this section. In any case, at least the country of origin should be indicated.
Declared means of conveyance: ____________
Terms such as “sea, air, road, rail, mail, and passenger” should be used. The ship’s name and voyage number or the aircraft's flight number should be included if known.
Declared point of entry: ____________
This should be the first point of arrival in the country of final destination, or if not known, the country name. The point of entry of the first country of importation should be listed where more than one country is listed in the “TO:” section. The point of entry for the country of final destination should be listed in cases where the consignment only transits through another country. If the country of transit is also listed in the “TO:” section, the points of entry into the transit country as well as the final destination country may be listed (e.g. point A via point
Answer:
the above answer is correct