safe construction practices (disaster management)
Answers
safe construction practices are those practices which should be followed in disaster prone areas while constructing houses or any type of buildings so as to avoid so much damage at the time of a disaster....
the safer construction to prevent cyclones are: 1) the house must be built with a strong concrete
2) if budget for strong concrete is not available then dig an underground tunnel for vacating if there is disaster
Safe construction practices include using materials that allow fora combination of flexing and tensile strength, as well as lighterbuilding materials especially in the roof. Strong foundations, highquality materials, and excellent workmanship go a long way to makeearthquake prone homes safer.
Safe construction practices in disaster management includesfollowing disaster risk reduction construction plans for newbuildings or structures. Safer building procedures can minimize thevulnerabilities and risks in many areas.
Answer:
One of the signs of a potential tsunami is the occurrence of a very large earthquake that lasts for more than 20 seconds. If an area has been shaken by a very large earthquake, one should be on alert that shorelines located within the radius of the earthquake's epicentre, may be hit by a tsunami.
A more immediate and ominous sign of an approaching tsunami is a rapid and unexpected recession of water levels below the expected low tide. This can occur minutes before the shoreline is struck by a tsunami and can be the only sign along coastlines that are located too far from the earthquake epicentre to have felt the shaking.
A tsunami may also occur with very little warning.
Natural Resources Canada's seismologists monitor for such events, around the clock. As soon as possible, a tsunami warning is issued to media and municipalities in regions where a tsunami is likely to hit.
The Canadian Coast Guard's Marine Communications Traffic Services broadcasts tsunami alerts to mariners.
When you get warning of a tsunami, if there is time, move to higher ground immediately.
Explanation:
Safe construction practices include using materials that allow fora combination of flexing and tensile strength, as well as lighterbuilding materials especially in the roof. Strong foundations, highquality materials, and excellent workmanship go a long way to makeearthquake prone homes safer