scientists has developed novel skin sensor that allow mobile device to be control from any point on the body.this Advance were challenging because such sensors can not measure touches precise enough, nor will they capture the multiple fingertips simultaneous.
Answers
Answered by
2
Sensors now make it possible to capture touches on the body very precisely, even from multiple fingers. Researchers have successfully tested a new prototype sensor in four different applications.
"The human body offers a large surface that is easy to access, even without eye contact," said Jürgen Steimle, a professor of computer science at Saarland University, explaining the researchers' interest in this literal human-computer interface. The development was challenging because the such sensors could not measure touches precisely enough, nor could they capture them from multiple fingertips simultaneously.
The prototype sensor, named Multi-Touch Skin, looks similar in structure to the touch displays that are well known from smartphones. Two stacked electrode layers, each arrayed in rows and columns, form a kind of coordinate system, at whose intersections electrical capacitance is constantly measured. Capacitance is reduced at the point where fingers touch the sensor, because the fingers conduct electricity and therefore allow the charge to drain away. These changes are captured at each point, and thus touches from multiple fingers can be detected. In order to find the optimal balance between conductivity, mechanical robustness and flexibility, the researchers evaluated different materials. Silver was chosen as the conductor, PVC plastic for the insulating material between the electrodes, and PET plastic for the substrate; the sensor could be printed using a household inkjet printer in less than a minute.
"So that we could really use the sensors on all parts of the body, we had to free them from their rectangular shape. That was an important aspect," explains Aditya Shekhar Nittala, who is doing his doctoral research in Jürgen Steimle's group. The scientists therefore developed software for designers to create their own desired sensor shapes. In the program, the designer first draws the outer shape of the sensor, then outlines the area within this outer shape that is to be touch-sensitive. A special algorithm then calculates the layout that will optimally cover this defined area with touch-sensitive electrodes. Finally, the sensor is printed.
"The human body offers a large surface that is easy to access, even without eye contact," said Jürgen Steimle, a professor of computer science at Saarland University, explaining the researchers' interest in this literal human-computer interface. The development was challenging because the such sensors could not measure touches precisely enough, nor could they capture them from multiple fingertips simultaneously.
The prototype sensor, named Multi-Touch Skin, looks similar in structure to the touch displays that are well known from smartphones. Two stacked electrode layers, each arrayed in rows and columns, form a kind of coordinate system, at whose intersections electrical capacitance is constantly measured. Capacitance is reduced at the point where fingers touch the sensor, because the fingers conduct electricity and therefore allow the charge to drain away. These changes are captured at each point, and thus touches from multiple fingers can be detected. In order to find the optimal balance between conductivity, mechanical robustness and flexibility, the researchers evaluated different materials. Silver was chosen as the conductor, PVC plastic for the insulating material between the electrodes, and PET plastic for the substrate; the sensor could be printed using a household inkjet printer in less than a minute.
"So that we could really use the sensors on all parts of the body, we had to free them from their rectangular shape. That was an important aspect," explains Aditya Shekhar Nittala, who is doing his doctoral research in Jürgen Steimle's group. The scientists therefore developed software for designers to create their own desired sensor shapes. In the program, the designer first draws the outer shape of the sensor, then outlines the area within this outer shape that is to be touch-sensitive. A special algorithm then calculates the layout that will optimally cover this defined area with touch-sensitive electrodes. Finally, the sensor is printed.
Similar questions