Question

sorry @aashnaa67brainly but I didn't understood what you answered

But can you explain this in easy language or anyone else can. These are the parts of 3d printers​

Answer 1

Answer:

please mark me as brainlist please please please please please please please please and gave me a lovely kiss please please

Explanation:

1)The importance of the 3D printer frame is attributed to the following: It supports all the mechanical and electrical components that carry out the actual printing work. It determines the build volume of the 3D printer. It gives the printer its robust look, as well as its aesthetic appearance.2)The motion components are the parts responsible for the movement of the 3D printer in the three axes. They are the ones that move the print bed and the print head. Basically, the controller board directs how the 3D printer should move while the motion components are the ones that do the actual moving.3)Power supplies, or PSUs (power supply units), are usually clunky metal boxes with a row of screw terminals or a bundle of wires at one end and a fan on the side. ... Also within a PSU is a rectifier circuit, which converts the wall's AC current to the DC current a 3D printer needs.4)print bed is the surface of a 3D printer where a print head lays down the materials that make up a 3D print. A 3D printer requires the print bed to be level and flat in order to successfully produce layers of media in filament form that make up a 3D-printed object.5)The key to a successful 3D print is a good first layer, and the key to a successful first layer is choosing the right print bed surface for the material you are 3D printing. In this guide, we will go through the most popular 3D materials to print with and describe the best techniques for getting them to stick to the bed and achieving a stellar first layer.

BuildTak and FlexPlate

BuildTak is a popular all purpose 3D bed surface. It comes as a sheet with an adhesive back. Simply peel the protective film off and then stick it to your bed.

In addition, the FlexPlate System makes utilizing BuildTak sheets even easier. Available in many sizes to fit all kinds of 3D Printers, simply add the Magnetic Base on top of the existing print bed and the FlexPlate with attached BuildTak sheet will magnetically connect. After a 3D Print is finished the top two sheets easily slide away from the print bed and with a twist the part releases cleanly. Replace the FlexPlate and BuildTak sheet to the magnetic base and you're ready to print your next part!.6)A filament of thermoplastic, metal wire, or other material is fed into an extrusion nozzle head (3D printer extruder), which heats the material and turns the flow on and off. ... These techniques include selective laser sintering, with both metals and polymers, and direct metal laser sintering.