State 7 ways by which we can conserve water.Explain
Answers
Answer:
Check Your Winter Water Bill! The majority of wasted water comes from household leaks. The average family of four should use less than 12,000 gallons per month. More than that could indicate a leak.
Stop The Leak: Fixing leaks not only helps save water, it saves money on your water bill. Finally fixing that running toilet is a great place to start. A constantly running toilet can waste up to 4,000 gallons of water each day. That equates to doing approximately 3,200 loads of laundry a month!
Fill It Up: Don’t run your washing machine or dishwasher with anything less than a full load. And always skip the permanent press cycle, which uses an additional 5 gallons of water for the rinse spin.
Take 5-Minute Showers. Compared to baths, which use up to 70 gallons of water, 5-minute showers only use up to 25 gallons. If you want to save even more water, install low-flow showerheads, which only emit 2.5 gallons per minute.
Turn Off The Tap! Don’t keep water running while you’re brushing your teeth or shaving in the sink. Rinse razors in a pool of water – otherwise, you could be wasting around 2 gallons of water per minute.
Aerate The Lawn: Water from sprinklers can pool on the surface and evaporate before it ever reaches the roots. This means more water is required to penetrate the ground, especially in dryer climates. Aerating the lawn allows water to reach the roots faster while using less.
Collect Rainwater: Direct gutters into a cistern. Reclaimed rainwater is perfect for watering plants. It’s all about the re-use!
Explanation:
Follow these tips for how to save water at home:
1. Be mindful of running water.
Don't keep the faucet running the entire time you're brushing your teeth or washing your hands. You may have heard this one before, but it's easy to lazily run the faucet instead of turning it off while scrubbing and then turning the tap back on when you're ready to rinse. Similarly, avoid luxuriously long showers. Try to limit shower time to 10 to 15 minutes maximum to prevent wasting excess gallons of water.
2. Fix leaks as soon as possible.
Look out for leaky faucets, dripping water from shower heads, rusting pipes and signs of water damage. Locate the source of the leak, and fix it immediately to avoid wasting more water.
3. Don't let the toilet run.
If you notice that your toilet is constantly running, try replacing the flapper. Simply shut off the water to the toilet, and flush to drain the tank. Unhook the old flapper from the base of the tank and chain, and then replace it with the new one. Turn the water back on, and you're all set. If that doesn't work, it may be time to buy a new toilet. Look for an energy-efficient model, and follow these steps to remove the old unit and install the new one.
4. Wash full loads only.
Make sure the dishwasher and washing machine are full before you run them. If you have a unit with energy-saving settings for light washes and smaller loads, take advantage of them. When it's time to invest in a new machine, look for water-saving models with the settings that allow you to adjust to load size.
5. Use a compost bin.
An in-sink garbage disposal needs a lot of water to work efficiently, so opt for a compost bin instead. It's healthier for the environment while reducing water waste and increasing the energy efficiency of your home.
6. Insulate pipes.
Be sure to insulate exposed pipes around the house, especially in the attic and basement. When they're not insulated, it takes longer for water to heat up, meaning it's running for longer periods of time. You can also cover the water heater with insulating blanket to further speed up the process.
7. Run the sprinklers in the morning.
The optimal time to water your lawn is early morning. This strategy prevents rapid evaporation from midday heat, which means less water is required to sufficiently cover the grass. Avoid rogue sprinklers wasting water by spraying the sidewalk or side of the house, instead positioning them to face the grass and landscaping appropriately.
8. Perform routine appliance maintenance.
Proper appliance care and upkeep can prevent potential leaks and wasted energy. This preventative maintenance includes regular cleaning and seeking professional advice when necessary. Plus, if it's time for an upgrade, buy energy-saving products and appliances. According to the EPA, the average household can use about 20 percent less water with water-efficient fixtures and appliances