State various methods by which energy is obtained from sea ; and explain in detail any one of than?
Answers
Answer:
There are three basic types that allow us to use ocean for its energy. We can use the waves (wave energy, wave power), ocean tidal power (ocean high and low tides), and we can even use temperature differences in the water to create an energy (Ocean Thermal Energy Conversion, OTEC).
Tidal energy is power produced by the surge of ocean waters during the rise and fall ... Some of these technologies include turbines and paddles. ... All methods use special generators to convert tidal energy into electricity.
Wave energy (or wave power) is the transport and capture of energy by ocean surface waves. The energy captured is then used for all different kinds of useful work, including electricity generation, water desalination, and pumping of water
Ocean thermal energy conversion (OTEC) is a process or technology for producing energy by harnessing the temperature differences (thermal gradients) between ocean surface waters and deep ocean waters. ... OTEC systems using seawater as the working fluid can use the condensed water to produce desalinated water.
Workers install equipment for an ocean thermal energy conversion experiment in 1994 at Hawaii’s Natural Energy Laboratory. Credit: A. Resnick, Makai Ocean Engineering, Inc.
The ocean can produce two types of energy: thermal energy from the sun’s heat, and mechanical energy from the tides and waves.
Oceans cover more than 70% of Earth’s surface, making them the world’s largest solar collectors. The sun’s heat warms the surface water a lot more than the deep ocean water, and this temperature difference creates thermal energy. Just a small portion of the heat trapped in the ocean could power the world.
Ocean thermal energy is used for many applications, including electricity generation. There are three types of electricity conversion systems: closed-cycle, open-cycle, and hybrid. Closed-cycle systems use the ocean’s warm surface water to vaporize a working fluid, which has a low-boiling point, such as ammonia. The vapor expands and turns a turbine. The turbine then activates a generator to produce electricity. Open-cycle systems actually boil the seawater by operating at low pressures. This produces steam that passes through a turbine/generator. And hybrid systems combine both closed-cycle and open-cycle systems.
Ocean mechanical energy is quite different from ocean thermal energy. Even though the sun affects all ocean activity, tides are driven primarily by the gravitational pull of the moon, and waves are driven primarily by the winds. As a result, tides and waves are intermittent sources of energy, while ocean thermal energy is fairly constant. Also, unlike thermal energy, the electricity conversion of both tidal and wave energy usually involves mechanical devices.
A barrage (dam) is typically used to convert tidal energy into electricity by forcing the water through turbines, activating a generator. For wave energy conversion, there are three basic systems: channel systems that funnel the waves into reservoirs; float systems that drive hydraulic pumps; and oscillating water column systems that use the waves to compress air within a container. The mechanical power created from these systems either directly activates a generator or transfers to a working fluid, water, or air, which then drives a turbine/generator.
Ocean energy content for this section provided in part by the National Renewable Energy Laboratory and the Department of Energy
Explanation:
PLZ mark as brainliest
Answer:
1) Tidal Energy
2) Wave Energy
3) Ocean thermal Energy