steps of construction to copy acute angel
Answers
steps;
1) Using a straightedge, draw a reference line, If one is not provided.
2) place a dot on the reference line.
3) place the point of campus on the vertex of the given angle.
4)Place the point of the compass on the vertex of the given angle, ∠ABC (vertex at point B).
5)Stretch the compass to any length that will stay "on" the angle.
6) swing an arc so the pencil will cross both sides.
7) Place the campus point on starting point.
on the reference line and swing an arc that will intersect the reference line and go above the reference line.
8) Go back to the given angle ∠ABC and measure the span (width) of the arc from where it crosses one side of the angle to where it crosses the other side of the angle. (Place a small arc to show you measured this distance.)
9) Using this width, place the compass point on the reference line where the previous arc crosses the reference line and mark off this new width on your new arc.
10) Connect this new intersection point to the starting point (dot) on your reference line.
11) Label your copy.
Hope it helps...
please make brainliest...!