Question

tell the answer fast......​

Answer 1

Answer:

hey option B is the right answer peace

Answer 2

Generation and storage

Rates of solid-waste generation vary widely. In the United States, for example, municipal refuse is generated at an average rate of approximately 2 kg (4.5 pounds) per person per day. Japan generates roughly half this amount, yet in Canada the rate is 2.7 kg (almost 6 pounds) per person per day. In some developing countries the average rate can be lower than 0.5 kg (1 pound) per person per day. These data include refuse from commercial, institutional, and industrial as well as residential sources. The actual rates of refuse generation must be carefully determined when a community plans a solid-waste management project.

Most communities require household refuse to be stored in durable, easily cleaned containers with tight-fitting covers in order to minimize rodent or insect infestation and offensive odours. Galvanized metal or plastic containers of about 115-litre (30-gallon) capacity are commonly used, although some communities employ larger containers that can be mechanically lifted and emptied into collection trucks. Plastic bags are frequently used as liners or as disposable containers for curbside collection. Where large quantities of refuse are generated—such as at shopping centres, hotels, or apartment buildings—dumpsters may be used for temporary storage until the waste is collected. Some office and commercial buildings use on-site compactors to reduce the waste volume.

Solid-Waste Collection

Collecting and transporting

Proper solid-waste collection is important for the protection of public health, safety, and environmental quality. It is a labour-intensive activity, accounting for approximately three-quarters of the total cost of solid-waste management. Public employees are often assigned to the task, but sometimes it is more economical for private companies to do the work under contract to the municipality or for private collectors to be paid by individual home owners. A driver and one or two loaders serve each collection vehicle. These are typically trucks of the enclosed, compacting type, with capacities up to 30 cubic metres (40 cubic yards). Loading can be done from the front, rear, or side. Compaction reduces the volume of refuse in the truck to less than half of its loose volume.