Science, asked by Kusumsahu7, 1 year ago

<b>

Hi dear ✋✋

Today's next question ??

How to taste the conductivity of lemon juice towards electricity ?

<marquee>
❌ Please don't spammer ❌

<marquee>

Because its for my exam

So please Its my humble request

<marquee>
Don't give Unnecessary answer ❌❌

Because it's my exams ⚘⚘

Answers

Answered by aastha4865
11
 | |hellooo \: friend| |

✳✳✳✳✳✳✳✳✳✳✳✳✳✳✳✳✳✳✳✳✳✳✳✳

Question:-

How to Conduct Electricity With Lemon Juice

Answer:-

Step 1 – Take a single lemon and roll on a flat surface pushing down firmly. This will ensure that the lemon juice and moisture from the fruit of the lemon mix more freely inside of the lemon. Take care not to puncture the skin of the lemon during this step.

Step 2 – Straighten a single paper-clip and insert approximately half-way into the lemon's skin.

Step 3 – Cut a six inch piece of the copper wire and insert approximately one inch into the lemon's skin. The copper wire should not be touching the paper-clip.

Step 4 – If you have a multimeter available, use it to check the paper-clip and copper wire that are inserted into the lemon for current. If you do not have access to a multimeter, touch the copper wire and paper-clip to the base of the light bulb to see if enough electricity is being produced to generate light.

Step 5 – If light is not produced in step 4, or the multimeter does not indicate that there is electricity being produced, connect an additional lemon in series to the one prepared in steps 1 through 3. To connect the additional lemon, wrap the end of the copper wire coming out of the new lemon about that of the first and do the same with the paper-clips and repeat the light-bulb test.

✋Hope it helps you✋


#Dramaqueen⭐

Kusumsahu7: I want for 2 Mark's
aastha4865: ok....so u wnt 2 marks answer
Kusumsahu7: yeh
aastha4865: ok...wait
Answered by WritersParadise01
28

\bf{Answer} :-

" testing the conductivity of lemon juice towards electricity "

ACTIVITY :-

Pour some lemon juice in a clean beaker. Then , dip the well - cleaned ends of two wires of the tester ( picture is shown in attachment ) ; keep it away from each other by about 2 to 3 cm , in the lime juice. Take care that the ends do not touch the bottom of the beaker . Observe if the bulb glows!

Now , we can observe that when the conductivity tester is dipped in the solution of lime juice , the Bulb glows.

thus , it shows the conductivity of lime juice towards electricity.

Attachments:

WritersParadise01: hehe ! handmade diagram ! xD thnx didu❤️
Anonymous: 5 stars for it, especially my sis handmade diagram.... Jada mjak mt urao uski diagram ka... xP
Anonymous: majak or mena.. vo bhi uraya :-P
Anonymous: xD tarif ki hai acha se padho
WritersParadise01: xD waise bhi didi ka majak bhi mujhe taarif hi lagega ;) and thnx adi
WritersParadise01: thnx
WritersParadise01: hehe!
Similar questions