Science, asked by kumarvedant2012, 9 months ago

The cost of the systems of wiring is maximum in case of
(A) Cleat wiring
(B) Lead sheathed wiring
(C) Conduit wiring
(D) Wood Casing Capping wiring.

Answers

Answered by diyavdev
2

Answer:

HOPE THIS WILL HELP U

Explanation:

Types of Electrical Wiring Systems

The types of internal wiring usually used are

Cleat wiring

Wooden casing and capping wiring

CTS or TRS or PVC sheath wiring

Lead sheathed or metal sheathed wiring

Conduit wiring

There are additional types of conduit wiring according to Pipes installation (Where steel and PVC pipes are used for wiring connection and installation).

A) Surface or open Conduit type

B) Recessed or concealed or underground type Conduit

1. Cleat Wiring

Cleat wiring system is a temporary wiring system therefore it is not suitable for domestic premises. The use of cleat wiring system is over nowadays.

Advantages of Cleat Wiring

It is simple and cheap wiring system

Most suitable for temporary use i.e. under construction building or army camping

As the cables and wires of cleat wiring system is in open air, Therefore fault in cables can be seen and repair easily.

Cleat wiring system installation is easy and simple.

Customization can be easily done in this wiring system e.g. alteration and addition.

Inspection is easy and simple.

Disadvantages of Cleat Wiring

Appearance is not so good.

Cleat wiring can’t be use for permanent use because, Sag may be occur after sometime of the usage.

In this wiring system, the cables and wiring is in open air, therefore, oil, Steam, humidity, smoke, rain, chemical and acidic effect may damage the cables and wires.

it is not lasting wire system because of the weather effect , risk of fire and wear & tear.

it can be only used on 250/440 Volts on low temperature.

There is always a risk of fire and electric shock.

it can’t be used in important and sensitive location and places.

It is not lasting, reliable and sustainable wiring system.

2.   Capping wiring

Casing and Capping wiring system was famous wiring system in the past but, it is considered obsolete this days because of Conduit and sheathed wiring system. The cables used in this kind of wiring were either VIR or PVC or any other approved insulated cables.

Answered by anjalin
0

The cost of the systems of wiring is maximum in case of (C) Conduit wiring.

Explanation:

  • Electrical wiring is one of the most important and technical parts of construction.
  • In Conduit wiring, an electrical conduit is used which is a tube used to protect and route electrical wiring in a building or structure.
  • Among all the types of electrical wiring, conduit wiring is considered the best and the costliest system of wiring.
  • It is done by using a conduit, which is simply the channels or tubes which provide a path and protection to the electrical wiring.
  • Plastic, fiber, and fired clay are generally used for these conduits.
  • While, the cheapest system of wiring is cleat wiring which is used in hospitals, drawing rooms, high precision workshops, etc.
  • Hence, the correct answer among all the options is option (C) Conduit wiring.

(#SPJ3)

Similar questions