Question

the experiment is .
material required :two bulb a cell and a switch .
now take the cell attach is to a wire and one side of the wire to the switch and the other to 1 bulb and continue the wire connected to the switch and join it to another bulb then join both the bulb with the wire and on the switch now the circuit is completed. now of the switch . then remove one bulb and again on the switch. now off the switch again and place the bulb again in the holder and cut a little bit of a wire then again on the switch then of it .

conclusion : when the socket was completed the both the bulb was in the holder and the wire was in a good quality full stop the bulb lightning up. when we remove one bulb the socket was incompleted . the bulb does not light up. and when we placed both the bulb in the holder and slightly broken the wire . the bulb does not lighten up .

report: as prove that if the circuit will not be completed the bulbs will not be lighten up.

this is the experiment please send me a video related to it.​

Answer 1

here is your answer bro