the face plate is used to hold as
Answers
Answered by
2
This set of Machine Tools Multiple Choice Questions & Answers (MCQs) focuses on “Lathe : Angel Plates and Face Plates”.
1. Angle plate is a cast iron plate.
a) true
b) false
View Answer
2. How many machined faces do angle plates have?
a) 1
b) 2
c) 3
d) 4
View Answer
Answer: b
Explanation: Angle plates have two plates. Both of these plates are placed perpendicular to each other.
3. Which of the following is provided on the faces of angle plates?
a) holes
b) slots
c) holes and slots both
d) none of the mentioned
View Answer
Answer: c
Explanation: Holes and slots both are provided on the faces of angle plates so that it may be clamped on a face plate and can hold the work piece on the other face.
4. Angle plates are used in conjunction with a face plate.
a) true
b) false
View Answer
Answer: a
Explanation: Angle plates are used in conjunction with a face plate. It can be easily understood by looking at the working of the angle plates.
5. In angle plates, clamping is used for______
a) elbow pipe
b) angle plate
c) both elbow pipe and angle plate
d) none of the mentioned
View Answer
Answer: c
Explanation: Clamping is used for this both purposes. Angel plate is used in machining a flange of a pipe elbow.
6. Which of the following is not true for angle plates?
a) when eccentric jobs are bolted to the face plate, counter weight must be added
b) in machining a flange of a pipe elbow, the surface which holds the work piece must be placed horizontal
c) for balance weight, angle plates are used
d) none of the mentioned
View Answer
Answer: d
Explanation: All sentences are true. These all are the mechanisms related to angel plates. Angel plates are used along with face plates when work can not be done by chucks or when we need higher accuracy.
7. Face plates are used with_____ accessories.
a) clamps
b) T- bolts
c) stepped block
d) all of the mentioned
View Answer
Answer: d
Explanation: Face plates are used with all mentioned accessories. A face plate plate has radial plain and T slots for holding work by bolts and clamps.
8. For holding work pieces, which cannot be conveniently between centers, _____ is used.
a) three jaw chuck
b) four jaw chuck
c) face plates
d) all of the mentioned
View Answer
Answer: c
Explanation: Face plates are used for these purposes. The work piece include large flat, irregular shaped workpieces, casting, jigs and fixture may be firmly clamped to a face plate for various turning operations.
9.The position of the bolts and clamps is very important in face plates.
a) true
b) false
View Answer
Answer: a
Explanation: The position of the bolts and clamps is very important in face plates, if a work piece is to be clamped effectively. Various types of face plates are used for proper clamping like face plates with elongated slots, face plates with elongated radial slots and so on.
10. Which of the following is not true for face plates?
a) a face plate consists of a circular disc bored out
b) the work piece includes casting and jigs may not be clamped by using face plates
c) face plates are used as an alternative option of chucks
d) none of the mentioned
View Answer
Answer: b
Explanation: All the mentioned sentences are true except one which says that the work piece includes casting and jigs may not be clamped by using face plates. The work piece includes casting and jibs may be firmly clamped by using face plates.
please mark it as brainiest
1. Angle plate is a cast iron plate.
a) true
b) false
View Answer
2. How many machined faces do angle plates have?
a) 1
b) 2
c) 3
d) 4
View Answer
Answer: b
Explanation: Angle plates have two plates. Both of these plates are placed perpendicular to each other.
3. Which of the following is provided on the faces of angle plates?
a) holes
b) slots
c) holes and slots both
d) none of the mentioned
View Answer
Answer: c
Explanation: Holes and slots both are provided on the faces of angle plates so that it may be clamped on a face plate and can hold the work piece on the other face.
4. Angle plates are used in conjunction with a face plate.
a) true
b) false
View Answer
Answer: a
Explanation: Angle plates are used in conjunction with a face plate. It can be easily understood by looking at the working of the angle plates.
5. In angle plates, clamping is used for______
a) elbow pipe
b) angle plate
c) both elbow pipe and angle plate
d) none of the mentioned
View Answer
Answer: c
Explanation: Clamping is used for this both purposes. Angel plate is used in machining a flange of a pipe elbow.
6. Which of the following is not true for angle plates?
a) when eccentric jobs are bolted to the face plate, counter weight must be added
b) in machining a flange of a pipe elbow, the surface which holds the work piece must be placed horizontal
c) for balance weight, angle plates are used
d) none of the mentioned
View Answer
Answer: d
Explanation: All sentences are true. These all are the mechanisms related to angel plates. Angel plates are used along with face plates when work can not be done by chucks or when we need higher accuracy.
7. Face plates are used with_____ accessories.
a) clamps
b) T- bolts
c) stepped block
d) all of the mentioned
View Answer
Answer: d
Explanation: Face plates are used with all mentioned accessories. A face plate plate has radial plain and T slots for holding work by bolts and clamps.
8. For holding work pieces, which cannot be conveniently between centers, _____ is used.
a) three jaw chuck
b) four jaw chuck
c) face plates
d) all of the mentioned
View Answer
Answer: c
Explanation: Face plates are used for these purposes. The work piece include large flat, irregular shaped workpieces, casting, jigs and fixture may be firmly clamped to a face plate for various turning operations.
9.The position of the bolts and clamps is very important in face plates.
a) true
b) false
View Answer
Answer: a
Explanation: The position of the bolts and clamps is very important in face plates, if a work piece is to be clamped effectively. Various types of face plates are used for proper clamping like face plates with elongated slots, face plates with elongated radial slots and so on.
10. Which of the following is not true for face plates?
a) a face plate consists of a circular disc bored out
b) the work piece includes casting and jigs may not be clamped by using face plates
c) face plates are used as an alternative option of chucks
d) none of the mentioned
View Answer
Answer: b
Explanation: All the mentioned sentences are true except one which says that the work piece includes casting and jigs may not be clamped by using face plates. The work piece includes casting and jibs may be firmly clamped by using face plates.
please mark it as brainiest
Answered by
1
Answer:
A faceplate is a circular metal plate used for holding workpieces in a lathe. When the workpiece is clamped to the faceplate of the lathe, turning can begin. A workpiece may be bolted or screwed to a faceplate, a large, flat disk that mounts to the spindle.
Explanation:
faceplate is a piece of material, usually plastic or metal, used to fit over a device's components. It is mainly used for protection and for enhancing the design and appearance of the device.01.
Similar questions