Chemistry, asked by drm14, 11 months ago

The heat of combustion of CxHy , carbon and hydrogen are a, b and c cal respectively. The heat of formation of CxHy will be?
a]. -(xb+(yc/2)+(a/2)) cal
b]. -(xb+(yc/2)-a) cal
c]. (xb-(yc/2)+(a/2)) cal
d]. (xb-(yc/2)-(a/2)) cal

Answers

Answered by priyanshnice

1

Answer:cxhy kya hai

Explanation:

Previous Question

Next Question

Similar questions

English, 6 months ago

image if I were a friend of a blind boy who has achieve in long pole jump and won it it what is my inspiration about the boy prepare a diary ...

Sociology, 6 months ago

xercises Answer the following questions. (i) Which are the two main climatic factors responsible for soil formation? (ii) Write any two reasons for land degradation today. (iii) Why is land considered an important resource? (iv) Name any two steps that government has taken to conserve plant and animals. (v) Suggest three ways to conserve water. Tick the correct answer.

Environmental Sciences, 6 months ago

Name the following : (i) A parasitic plant with yellow, slender and branched stem.

Geography, 11 months ago

which side book is best for class9 social science...

Science, 11 months ago

the train is Practice Questions: 1) A travelling bus is stopped by applying brakes in 5 seconds. If retardar of the bus is 2ms, what is the initial velocity of the bus? 2) A train starts to move from the state of rest. If the velocity of the traini km/hr in 2 minutes and 30 seconds, what will be the acceleration? 3) A constant force acts on a 10kg object and reduces its velocity from Om F to 3ms'...

Biology, 1 year ago

The damping factor of a solid polymer under sinusoidal loading in single cantilever mode showing 80 percent recovery in modulus is _____.

Biology, 1 year ago

In a unidirectional carbon fibre reinforced epoxy composite, the ratio of fibre-to-matrix moduli is 30 and the fibres take up 50% of the cross-section. The percentage of applied force taken up by the fibres is _____...

Biology, 1 year ago

Match the thermosetting resins to the raw materials they are synthesized from Resin Raw material P. Epoxy 1. Cresol + furfural Q. Phenolic 2. Diethylene glycol + diallyl phthalate R. Unsaturated polyester 3. Bisphenol A + epichlorohydrin S. Allyl 4. Maleic acid + 1,2-propylene glycol (A) P-4; Q-2; R-3; S-1 (B) P-3; Q-1; R-2; S-4 (C) P-3; Q-2; R-1; S-4 (D) P-3; Q-1; R-4; S-2...