The proces of making soap in aboute 100 words
Answers
Answer: Soap-making is a simple process, and it's likely you have many of the ingredients and tools already in your kitchen. However, it requires careful measurements, as you are using chemicals, some of which can be dangerous.
Saponification is an exothermic chemical reaction—which means that it gives off heat—that occurs when fats or oils (fatty acids) come into contact with lye, a base. In this reaction, the triglyceride units of fats react with sodium hydroxide or potassium hydroxide and are converted to soap and glycerol. For some types of soap, salt is then added to precipitate the solid soap.
The saponification generally takes about 24 to 48 hours to complete once the lye and oils have been mixed and the raw soap has been poured into the mold. This process can be sped up by adding more heat or slowed down by keeping the process cold.
Soap-Making Calculator
Oils and fats each have what is called a “saponification value,” which is the amount of lye needed to completely neutralize them into the soap with no lye left over. Each oil has a different value, which is why it’s important to always run soap recipes through a lye calculator. The calculator will help ensure that the ratios of water, oils, and lye are correct and will produce the results you are looking for.
Impact of Ingredients
There are many variables that will impact saponification and different soap ingredients have very distinct characteristics. Be sure to research the types of fatty acids you are using (for example, coconut oil, olive oil, etc.) and the results they may have on the final soap product. Depending on the ingredients used, soaps can vary greatly with different attributes such as lather, bar consistency, and cleansing ability.
Most of the ingredients for soap-making can be found in a grocery or hardware store. Be sure to buy pure high-quality lye that is made specifically for soap-making. In addition to the basic soap ingredients, there are many options that can be added to the soap to alter the fragrance, consistency, and color of the soap. Once the basic soap-making has proven successful, try experimenting with other soap variations.
Storing the Soap
Homemade soap should be left to air-dry for approximately four to six weeks. This is known as the curing time, and it will allow for any excess water to evaporate out of the soap. It's best for the soap to be in a cool, dry location, not touching anything else while it is drying. A shoebox in a dark closet is a perfect location.
If the homemade soaps contain any fragrances, store each fragranced soap in its own box so the scents do not mix. Once the soap is cured, be sure to label it with the ingredients used and the date the soap was made.
Answer:
here's your answer...
......
What you will need. ...
Step 1: Measure and prepare. ...
Step 2: Melt your oils. ...
Step 3: Mix up your lye solution. ...
Step 4: Combine melted and liquid oils. ...
Step 4: Time to Make the Soap! ...
Step 4: Cook it! ...
Step 5: Craft your masterpiece....
......this process is called sopnification
.......
hope it helps you
Explanation:
....
have a great day ahead