Question

The products formed in chlor alkali process are:

1 point

NaCl, chlorine and water

NaOH, chlorine and hydrogen gas

CaOCl2 and chlorine

none of these

​

Answer 1

Answer:

The chloralkali process (also chlor-alkali and chlor alkali) is an industrial process for the electrolysis of sodium chloride solutions. It is the technology used to produce chlorine and sodium hydroxide (lye/caustic soda),[1] which are commodity chemicals required by industry. 35 million tons of chlorine were prepared by this process in 1987.[2] Industrial scale production began in 1892.

Usually the process is conducted on a brine (an aqueous solution of NaCl), in which case NaOH, hydrogen, and chlorine result. When using calcium chloride or potassium chloride, the products contain calcium or potassium instead of sodium. Related processes are known that use molten NaCl to give chlorine and sodium metal or condensed hydrogen chloride to give hydrogen and chlorine.

The process has a high energy consumption, for example around 2500 kWh of electricity per tonne of sodium hydroxide produced. Because the process yields equivalent amounts of chlorine and sodium hydroxide (two moles of sodium hydroxide per mole of chlorine), it is necessary to find a use for these products in the same proportion. For every mole of chlorine produced, one mole of hydrogen is produced. Much of this hydrogen is used to produce hydrochloric acid, ammonia, hydrogen peroxide, or is combusted for power and/or steam production.[3]