The side face reinforcement, if required in a t-beam will be
Answers
Answered by
3
A.Need of side facing Reinforcement
This type of REINFORCEMENT is only used when depth of BEAM is 750 mm and more than 750m.ie:D>750mm
The basic concept of SIDE REINFORCEMENT is to Avoid cracks in Concrete after it getting Hard or set.
Cracks are basically due To bending moment acting on beam.
This bars are provided equally on both side
The provision of SIDE FACE REINFORCEMENT is according to IS456:2000.
This type of REINFORCEMENT is only used when depth of BEAM is 750 mm and more than 750m.ie:D>750mm
The basic concept of SIDE REINFORCEMENT is to Avoid cracks in Concrete after it getting Hard or set.
Cracks are basically due To bending moment acting on beam.
This bars are provided equally on both side
The provision of SIDE FACE REINFORCEMENT is according to IS456:2000.
Attachments:
Answered by
1
Side Reinforcement in Beams. To control cracking in beams with a total depth ˃ 750mm, side bars are provided in the side faces of the beam. The distribution of these bars is over a distance of two-third of the beam's overall depth measured from its tension face.
Similar questions