Three uses of Vernier calipers
Answers
.
.
●Measuring inner dimensions
●Measuring outer dimensions
●Measuring depth
3 best uses of V.C
1. Measuring Inside Dimensions
The upper set of jaws on the caliper can be used to measure inside dimensions, such as the diameter of a hole on a piece of wood or metal. Measuring the precise diameter of holes in pipes, cylinders, and other hollow objects is very important to many projects or applications. To get a precise measurement, the jaws will just be slid into the hole and the measurement taken from there. The caliper can also be used to measure holes of different shapes, e.g., square, rectangular, cylindrical, or hexagonal. Lastly, the upper jaws can be used to measure the distance between two objects, which can be done by putting the jaws between the objects.
2. Measuring Outside Dimensions
Outside dimensions include things such as the outer diameter of a cylinder and total length or width of an object. For measuring the outer diameter of something with the lower jaws, you will simply clamp them around the object. However, to measure length or width, you will place the object between the caliper jaws.
3. Measuring Depth
As previously mentioned, the Vernier caliper has a depth probe on the rear part. This probe can be extended from the edge of the hole through to the other end for a measurement.