Question

timer circut descussion​

Answer 1

Learning to analyze digital circuits requires much study and practice. Typically, students practice by working through lots of sample problems and checking their answers against those provided by the textbook or the instructor. While this is good, there is a much better way.

You will learn much more by actually building and analyzing real circuits, letting your test equipment provide the “answers” instead of a book or another person. For successful circuit-building exercises, follow these steps:

Draw the schematic diagram for the digital circuit to be analyzed.

Carefully build this circuit on a breadboard or other convenient medium.

Check the accuracy of the circuit’s construction, following each wire to each connection point, and verifying these elements one-by-one on the diagram.

Analyze the circuit, determining all output logic states for given input conditions.

Carefully measure those logic states, to verify the accuracy of your analysis.

If there are any errors, carefully check your circuit’s construction against the diagram, then carefully re-analyze the circuit and re-measure.

Answer 2

$\small\mathbf\red{{Answer\:❤}}$

$\small\mathbf\red{{Explaination\::-}}$

Learning to analyze digital circuits requires much study and practice. Typically, students practice by working through lots of sample problems and checking their answers against those provided by the textbook or the instructor. While this is good, there is a much better way.

You will learn much more by actually building and analyzing real circuits, letting your test equipment provide the “answers” instead of a book or another person. For successful circuit-building exercises, follow these steps:

Draw the schematic diagram for the digital circuit to be analyzed.

Carefully build this circuit on a breadboard or other convenient medium.

Check the accuracy of the circuit’s construction, following each wire to each connection point, and verifying these elements one-by-one on the diagram.

Analyze the circuit, determining all output logic states for given input conditions.

Carefully measure those logic states, to verify the accuracy of your analysis.

If there are any errors, carefully check your circuit’s construction against the diagram, then carefully re-analyze the circuit and re-measure.

HOPE THIS WILL HELP U!

$\small\mathbf\red{{Ashubhai01\:here}}$