To verify NORTON's Theorem. R1 = 160 ohm ,R2 = 368 ohm , R3 = 478ohm , RL = 823 ohm.Voltage Source = 26 V
Answers
Answered by
0
Answer:
Explanation:Norton on the other hand reduces his circuit down to a single resistance in parallel with a constant current source.
Nortons Theorem states that “Any linear circuit containing several energy sources and resistances can be replaced by a single Constant Current generator in parallel with a Single Resistor“.
As far as the load resistance, RL is concerned this single resistance, RS is the value of the resistance looking back into the network with all the current sources open circuited and IS is the short circuit current at the output terminals as shown below.
Similar questions