Two venturi meter of difference
area ratio and Connected at
difference locations of same
Pipe line. Similar monometers are
used across two venturi meters
to measures the discharge. The
first venturi meter of area
ratio 2 resistance Pressure
head difference is h while the
second venturi meter has resistance Pressure head difference 5h. Find
the area of ratio of second
venturi meter?
Answers
Answer:In many of today's industrial processes, it is essential to measure accurately the rate of fluid flow within a system as a whole or in part. This applies equally to gases and liquids (e.g. carbon dioxide, nitrogen, liquors etc.) which are an integral part of the process, or to compressed air, water or steam which are fundamental to plant operation. The installation of any flowmeter can be justified in one of two ways:
1. PROCESS CONTROL
Here the flowmeter is used to measure the rate of fluid or energy flow to allow the process to be controlled and so ensure that the end product is of the required quality. A common example of this would be in steam injection systems for the animal feeds industry...too much steam and the product will not pellet...too little steam and the raw materials will not process and may damage the production machinery.
2. COST ALLOCATION
Where energy is used to provide process or space heating, it is fundamental to know where the costs associated with the energy are actually being incurred. Flowmetering allows energy costs to be allocated to a particular product, department or other user this usually resulting in a significant reduction in total energy costs.
Explanation:
In the given question two venturimeters are connected to the same horizontal pipe so A11=A12.
A11 area of pipe connected at venturimeter 1
A21 area of throat at venturi 1
A12 area of pipe connected at venturimeter 2
A22 area of throat at venturi 2
