What are the products of wood?
Answers
Explanation:
>> Sawn timber, length packaged, is usually sold dried to the final moisture content relevant to the end use of the product. Many sawmills plane, profile, glue, finger-joint and pressure treat the timber themselves. More and more products are being refined into finished end products at the sawmills. Wood can be used for the manufacture of structural elements in all sorts of buildings, cladding products and joinery. Wood is also a key component of sheet material such as plywood, OSB, fibreboard and particleboard.
>> The dimensional accuracy of the wood is improved through planing, known as dimension planing. Profiling is used for certain products, such as skirting and architraves.
>> The quality of the wood is usually specified via appearance grading in line with standard SS-EN 1611-1, see also the section Wood grades, according to a company-specific grading, or via strength grading of the wood.
❄️ Wood for buildings
>> Construction timber accounts for a significant proportion of the wood in buildings with a wooden structural frame. Specific developments and applications may require different requirements than those met by traditional grading.
>> Grades that are specified for construction timber are used for the load-bearing parts of a wooden building.
>> Dimension planed spruce products are primarily used for construction timber. Dimensions and qualities are tailored to different applications. The raw material is commonly sorted from grades G4-2 – G4-3.
❄️ Wood for civil engineering
>> Wood has become much more widely used in civil engineering in recent years, its many uses can include temporary structures, e.g. shuttering and scaffolding, and permanent structures such as acoustic barriers, jetties, footbridges, road bridges, posts and fencing.
>> Larger civil engineering projects often use glulam, while pressure treated timber is commonly used in structures that are exposed to the elements.
❄️Construction timber
>> Strength graded wood is used for load-bearing structures. This grading may be conducted mechanically or visually in various classes, from C14 to C35. Finger-jointed timber may also be used as construction timber for load-bearing structures, with certain exceptions. Construction timber must be CE marked.
❄️Exterior cladding
>> Resawn dried main yield spruce is used for exterior cladding boards. The wood grade should be G4-2 or better. Cladding with a fine sawn or grooved surface can be painted using most paint systems. If the surface is planed, the cladding should not be painted with distemper. To keep the surface free from splits, the cladding boards are resawn after the wood has been dried. A band saw does the resawing in conjunction with the profile planing. This creates cladding with good dimensional stability and a surface structure that is suitable for surface treatment. Exterior cladding must be CE marked.
❄️Smooth planed
>> Smooth planed timber is manufactured from pine of at least grade G4-1.
❄️Mouldings
>> Mouldings made from solid wood are available in a wide range of different profiles and dimensions. In the Swedish standard SS 232811, mouldings are divided according to use into types A and B. Finger-jointed timber may occur in type B. In this case though, the fingers are shorter and are visible on the flat face of the moulding.
>> Type A mouldings are high quality, made from pine or hardwood, and are mainly intended for transparent treatment. The wood for the mouldings must be straight grown, free from splits, blue stain, pith streaks and pitchwood, and it must not be finger-jointed or repaired. Some sound knots, max. 7 mm in size, are permitted. Knots must not take up more than a third of the moulding’s width.
>> Type B mouldings are mainly those intended for painting and those intended for transparent treatment where knots are acceptable as a natural feature. The wood must be free from deep splits and pitchwood. Other splits with a width of max. 0.5 mm are permitted. Wood for mouldings must not be finger-jointed or repaired with wooden plugs. The size of the knots must not exceed a third of the moulding’s width. Knots other than sound knots are not permitted. Type B mouldings are not recommended for mouldings with a thickness of less than 10 mm.
❄️ Floorboards
>> Floorboards in solid coniferous wood are made using both pine and spruce. The grade and appearance varies between different flooring manufacturers. Tongue and groove floorboards are produced in grade G4-2 or better. The main yield is usually used, which means that larger or smaller streaks of heartwood will be visible in the surface of a pine floor.
❄️Formwork
>> The wood used for concrete shuttering is usually of a lower appearance grade, G4-4 or better, than the wood used as construction timber. It is common to have a sawn surface facing the concrete. Construction timber is used for the load-bearing parts of the shuttering.