What are the stages of silk fabric
Answers
Answer:
Silkworm has four stages in its life cycle viz., egg, silkworm, pupa and moth. Man interferes this life cycle at the cocoon stage to obtain the silk, a continuous filament of commercial importance, used in weaving of the dream fabric.
YOU CLICK AS BLAINLEAST AND THANKS.
Answer:
What is silk made of?
While there are now a huge variety of different types of insects used to produce silk, the most commonly used species is the larvae of ‘Bombyx mori’ – (the caterpillar of the domestic silkmoth). These incredible silkworms produce one of the most highly sought after materials with a plethora of excellent properties.
While silk is lustrous and lightweight, it’s also impressively strong, with one filament of silk being stronger than a comparable filament of steel.
How is silk made?
Here is a step-by-step guide to the fascinating process in which silk is produced…
1. Sericulture
This is the term used to describe the process of gathering the silkworms and harvesting the cocoon to collect the materials.
Female silkmoths lay anything from around 300 – 500 eggs at any one time. These eggs eventually hatch to form silkworms, which are incubated in a controlled environment until they hatch into larvae (caterpillars).
silkworm cocoon
The silkworms feed continually on a huge amount of mulberry leaves to encourage growth. It takes around 6 weeks to grow to their full potential (about 3 inches). At this time, they’ll stop eating and begin to raise their heads – that’s when they’re ready to spin their cocoon.
Attached to a secure frame or tree, the silkworm will begin spinning its silk cocoon by rotating its body in a figure-8 movement around 300,000 times – a process which takes around 3 to 8 days. Each silkworm produces just one single strand of silk, which measures about 100 metres long and is held together by a type of natural gum, called sericin.
2. Thread extraction
Once the silkworms have spun their cocoon, they will eventually enclose themselves inside it and then it’s time to extract the silk threads.
The cocoons are placed into boiling water in order to soften and dissolve the gum that is holding the cocoon together. This is a crucial step in the silk production process as it ensures that there is no damage to the continuity of each thread.
silk worm cocoons
Each thread is then carefully reeled from the cocoon in individual long threads, which are then wound on a reel. Some of the sericin may still remain on the threads to protect the fibres during processing, but this is usually washed out with soap and boiling water.
3. Dyeing
When the silk threads have been washed and degummed, they will be bleached and dried before the dyeing process commences.
Traditional silk dyeing techniques take the dyes from natural resources found in the surrounding environment, such as fruit or indigo plant leaves. The threads will be soaked together in bundles, inside a pot of hot indigo leaves and water. This process will occur multiple times over a span of days to ensure proper colour tone and quality.
4. Spinning
The traditional spinning wheel has always, and will always be an integral part of the silk production process. Although updated industrial processes are now able to spin silk threads much quicker, it simply mimics the functions of the classic spinning wheel.
5. Weaving
Weaving is the process in which the final piece of silk comes together. There are many different ways in which silk can be woven – satin weave, plain weave and open weave are most common, and the finish of the silk will depend on the type of weave.
Generally, weaving involves interlacing two sets of threads so that they lock around each other and create a strong, uniform piece of fabric. The threads will be woven at right angles to each other, and the two different angles are called a warp and a weft. The warp will run up and down the fabric, while the weft runs across it.
6.Printing
Should a piece of silk require a special pattern or design, it will need to be printed after pre-treatment. This can be done in two different ways: Digital Printing or Screen Printing.
7. Finishing
In order to be deemed ready for use, silks must be finished. Finishing a piece of silk gives it that highly lustrous sheen that it is so commonly known for, and is the reason that the desired look and feel can be achieved.