What is frictional force...plz tell in Full defination with examples.
Answers
Answer:
What is Frictional Force?
Friction is the force that resists motion when the surface of one object comes in contact with the surface of another. The mechanical advantage of a machine is reduced by friction, or in other words, the ratio of output to input is reduced because of friction. An automobile uses one-quarter of its energy on limiting the friction. Yet, it is also friction in the tires that allows the car to stay on the road and friction in the clutch that makes it possible to drive. From matches to machines to molecular structures, friction is one of the most significant phenomena in the physical world. In this article, let us discuss frictional force and its different types.
What is Frictional Force?
Frictional force refers to the force generated by two surfaces that contacts and slide against each other.
A few factors affecting the frictional force:
These forces are mainly affected by the surface texture and amount of force impelling them together.
The angle and position of the object affect the amount of frictional force.
If an object is placed flat against an object, then the frictional force will be equal to the weight of the object.
If an object is pushed against the surface, then the frictional force will be increased and becomes more than the weight of the object.
Calculating the Force of Friction
The maximum amount of friction force that a surface can apply upon an object can be easily calculated with the use of the given formula:
Ffrict = µ • Fnorm
To help you calculate the frictional force, here we have provided methodical steps to follow while calculating the force of friction.
Find the Normal Force
The normal force is the support force exerted upon an object that is in contact with another stable object. The normal force can be simply described in most cases by the following formula:
N = mg
In this formula, m describes the mass of the object, and g stands for the acceleration due to gravity. In case of an inclined surface, the strength of the normal surface is reduced the more the surface is inclined, hence the formula becomes:
N = mg cos(θ)
θ represents the angle the surface is inclined to. In a simple calculation, you would calculate the normal force of a 2-kg block of wood sitting on a surface as N = 2 kg × 9.8 N/kg = 19.6 N
Finding the Right Co-efficient
The co-efficient that you would choose depends on the object and the specific situation. If the object isn’t moving across the surface, you use the coefficient of static friction
μ
s
t
a
t
i
c
, but if the object under consideration is moving you use the coefficient of sliding friction
μ
s
l
i
d
e
. The type of materials used also affects the co-efficient. For example, if a block wood was on a brick surface, the coefficient would be 0.6, but if it were on a block of clean wood, it would range from 0.25 to 0.5.
Calculating Frictional Force
As discussed, the formula for frictional force is given by F = μN.
As an example, let us consider the block of wood that weighs 2-kg resting on a table to be pushed from rest. In this case, we consider the static friction co-efficient. 0.5 is the static co-efficient of wood.
With the given details, we can calculate the normal force as N = 2 kg × 9.8 N/kg = 19.6 N Now that we have the values of normal force and static friction co-efficient, we can calculate the frictional force as follows:
F = 0.5 × 19.6 N = 9.8 N
frictional force
Are there Different Types of Frictional Force?
Yes, there are different types of frictional forces. The friction that takes place between solid surfaces is classified as Static, Kinetic, Rolling, and Sliding Friction. The friction that takes place between fluids and gases are termed as fluid friction. Hence, friction is broadly classified as:
Dry Friction
Static Friction
Kinetic Friction
Rolling Friction
Sliding Friction
Fluid Friction
Dry Friction
Dry friction describes the reaction between two solid bodies in contact when they are in motion (kinetic friction) and when they are not (static friction). Both static and kinetic friction is proportional to the normal force exerted between the solid bodies. The interaction of different substances is modeled with different coefficients of friction. By this, we mean that certain substances have a higher resistance to movement than others for the same normal force between them. Each of these values are experimentally determined.
hope its help you
...
(please mark as brainliest)