Question

what is the correlation of steel​

Answer 1

Answer:

Hardness values as well as yield and tensile strength values were compiled for over 150 nonaustenitic, hypoeutectoid steels having a wide range of compositions and a variety of microstructures. The microstructures include ferrite, pearlite, martensite, bainite, and complex multiphase structures. The yield strength of the steels ranged from approximately 300 MPa to over 1700 MPa. Tensile strength varied over the range of 450-2350 MPa. Regression analysis was used to determine the correlation of the yield strength and the tensile strength to the diamond pyramid hardness values for these steels. Both the yield strength and tensile strength of the steels exhibited a linear correlation with the hardness over the entire range of strength values. Empirical relationships are provided that enable the estimation of strength from a bulk hardness measurement. A weak effect of strain-hardening potential on the hardness-yield strength relationship was also observed

Answer 2

Answer:

Here's ur answer

Explanation:

The behaviour of plain carbon as well as structural steels is qualitatively different at different regimes of strain rates and temperature when they are subjected to hot-working and impact-loading conditions. Ambient temperature and carbon content are the leading factors governing the deformation behaviour and substructural evolution of these steels. This review aims at investigating the mechanical behaviour of structural (or constructional) steels during their strain rate (ranging from very low to very high) as well as hot-working conditions and subsequently establishing the structure-property correlation. Rate-dependent constitutive equations play a significant role in predicting the material response, particularly where the experiments are difficult to perform. In this article, an extensive review is carried out on the merits and limitations of constitutive models which are commonly used to model the deformation behaviour of plain carbon steels.