Question

What to do when the router doest have wps connection to connect to printer?

Answer 1

Hi there,

If your router does not have a WPS button then it`s a virtual button that you need to access the User Interface of the router to push it in.

Here`s how to:

1. On a computer launch a browser

2. Type in the address bar 192.1681.1(Default Gateway of a linksys router)

3. Click WPS Wizard

4. Click the Padlock button and so as on your printer

NOTE: you have two minutes before it will timeout.

You have also two other ways to connect to the wireless network:

A. Scan and connect

A.1. On your printer LED panel, go to settings

A.2. Setup

A.3. Network Settings

A.4. Wireless Network settings

A.5. Scan for Networks

A.6. Select your wireless network and tap connect and put in the password to be authenticated and to be connected to the network

B. Add network manually

B.1. On a computer launch a browser

B.2. Type in the address bar 192.1681.1(Default Gateway of a linksys router)

B.3. go to wireless settings

B.4. Take note of the SSID, Security and passphrase/Network key or WPA key On your printer LED Panel:

B.5. On your printer LED panel, go to settings

B.6. Setup

B.7. Network Settings

B.8. Wireless Network settings

B.9. Tap on add network

B.10. Fill all the information it needs and it`ll be good to go

NOTE: Make sure you have installed the printers driver on your computer to be accessable and to printer wired and wireless