Science, asked by Bipu4724, 1 month ago

when using a microscope, Why is it that what is in focus for you is not necessarily in focus for somebody else

Answers

Answered by XxcuteruhixX
0

Answer:

WHEN YOU ARE DOING THIS FOCUSING, IT IS IMPORTANT TO BE VERY CAREFUL. IT WILL NOT TAKE MUCH ROTATION OF THE FINE FOCUS KNOB TO CAUSE THE 100X OBJECTIVE TO RAM THROUGH THE SLIDE, DAMAGING BOTH THE OBJECTIVE AND THE SLIDE.

Explanation:

✌❤ruhi❤✌

Plz mark me as brainlyest

Answered by Jasleen0599
0

When using a microscope, Why is it that what is in focus for you is not necessarily in focus for somebody else

  • Your condenser's height could be set either too high or too low (this can also affect resolution). Make sure your objective lenses are completely screwed into the microscope body. If the rack stop is changed on high school microscopes, the microscope won't focus.
  • Avoid using your fingers to touch the glass portion of the lenses. To clean the lenses, only use specialised lens paper.
  • When not in use, always keep your microscope covered.
  • A microscope should always be held in both hands. Take hold of the arm with one hand and support it with the other hand by placing it beneath the base.
  • To acquire a general overview of the specimen, scan the slide at low power from top to bottom and from right to left. Next, centre the area of the specimen that you want to see at a higher magnification. For 100x magnification, turn the nosepiece to the 10x objective. Refocus and take a close look at your specimen.
  • An instrument used to magnify small objects called a microscope. Even at the cellular level, some microscopes can be used to study an object, enabling researchers to view a cell's form as well as its nucleus, mitochondria, and other organelles.

#SPJ2

Similar questions