Why is it so hard to blend water colors
Answers
Answer:
if the paint become dry than it is hard otherwise it is easy
Answer and Explanation:
6 Ways to Blend Watercolors Like A Pro
1. PAINTING WET ON WET
Wet watercolor on wet paper is one of the most iconic watercolor techniques. It makes amazing and colorful washes across your paper. It also allows two colors to blend seamlessly. However, wet on wet can be difficult to control when it comes to more detailed work.
To use the wet on wet technique, paint clean water onto the paper in the shape where you will blend your colors. For large washes, this can mean brushing water over the whole paper. Or, apply it in a shape or particular place on the paper.
Remember, that you don’t need large pools of water to achieve this effect. Some people work with damp, while others like their paper to be more drenched. If your paper is too wet, though, it can become an unmanageable bog.
Then, use a brush dipped in wet watercolors. Lightly spread the color into the wet area of the paper. You will see that it begins to blend and diffuse the color. If the wash that you’re achieving is too patchy, use the brush to spread and even out the colors.
2. PAINTING WET ON DRY
Wet watercolor on dry paper allows you more control over your paint strokes. This can be great for layering paint layers to build up color, tone, shading, and a sense of dimensionality.
One of the major benefits of wet on dry is the shorter drying time, which allows you more opportunities for layering in a short amount of time.
To do this, use a diluted watercolor paint on a brush, and apply it to the dry surface of your paper. From this point, you can use further blending techniques to clean and clarify your edges while building your image using glazing techniques.
3. CLEAN UP YOUR EDGES
To avoid feathered, bleeding, or the overly hard edges that occur when too much pigment dries in one area, you will need a paper towel or absorbent cloth when you paint. This technique might become almost reflexive when it comes to painting finer detail work.
To practice, lay down a fairly wet and pigmented paint stroke. Dip your brush in clean water, then immediately use your cloth to dry it. You don’t have to wring it out, just make it so that it’s only damp. Run the damp brush on the edge that you want to control.
This will keep both the color from bleeding out of control, while also avoiding a hard edge from the dried paint. Additionally, this method can help you to clear away a dividing line when blending two colors side by side.
4. USE A DOUBLE-EDGED BRUSH FOR NOVELTY
In some cases, particularly when paint flowers, it can come in hand to load two different unblended colors onto your paintbrush.
For this technique, you will need a flat brush or a quill brush. This technique won't work with a basic round brush.
Then, load one side of the brush with one color, and the other side of the brush with another color.
When painting, orient the stroke so that the watercolors blend in the way you’d like them to. For example, you can lay down the colors side by side. Or by moving and tilting the stroke a little bit, you can force them to blend into each other.
5. MIXING WATERCOLORS IN THE PALETTE
There is one school of thought on watercolor that you should never use a pure color in your painting, and instead should always blend the color with a nearby color to add some dimension to your painting. This is actually at odds with another school of thought that you should use straight colors for their vibrancy and do the majority of your blending on the paper.
Sometimes, you really want to customize your painting with different shades and tones. When you’re really looking for the perfect shade, your best bet is to mix the color in a palette.
You’ll need a palette for this. Many watercolor tins come with attached palettes, but you can use anything from a plastic paint palette to a white ceramic plate. Most watercolor palettes have raised edges to keep the liquid mixes from leaking.
To blend watercolors on your palette, dab a wet color onto the palette. Then, dab in another color, or even a few more. Drag some colors together in the palette to start mixing and blending them. Then, tweak your blends by adding more and different colors until you have the one you want.
6. GLAZING
Once a layer of watercolor has dried, the glazing technique means adding more layers to create color variation and a sense of dimension.
You should wait until your previous layer has dried completely. Then, paint another layer on top.
Be careful of using your paintbrush to scrub as your paint. This could result in overworking the paper or reactivating the lower layers of paint, creating an unattractive mix.
Most glazing is done with very transparent watercolor layers.
The way that you blend your watercolors will influence everything, from the tone of your work to the way that you represent your subject matter.